AKCP - Model BATTMON - Battery Health Sensor
From Sensors - Power
Battery Monitoring Sensor for monitoring the voltage, temperature, and current load for batteries and DC power systems. The Battery Monitoring Sensor monitors an individual cell or bank of batteries, as well as DC power systems like solar panel arrays.
With Battery Monitoring Sensor, you can monitor:-
With Battery Monitoring Sensor, you can monitor:-
- The temperature of the battery terminals
- The voltage output from batteries or panel array
- Current load on batteries or charging circuit
Typical applications would be for battery monitoring, solar panel array, or generator starter batteries.
Solar Panel System
Monitoring of your complete solar panel system from end to end is possible by deploying multiple Battery Monitoring Sensors.
Solar Panel Array
Monitor the voltage and current output from your panels. Identify if they are running at less than optimum efficiency, for example, if they are dirty and need cleaning.
Battery Stack
The Battery Monitor system monitors the output of voltage and current from the battery stack, as well as battery temperatures.
Charge Status
By comparing the battery current load and the solar panel charging load you can identify if your system is providing sufficient charging power if you are draining your batteries, and if so at what rate they are being consumed.
Specifications
Mounting: DIN rail mounting
Screw mounting
Power: Input Voltage and Current ratings :
Voltage: 0~60VDC (3 configurable ranges: 0~15V, 0~30V or 0~60V)
Current: external CT
+ 50A (standard)
+ 100A
+ 200A
+ 400A
+ 500A
+ 600A
+ 800A
+ 1000A
+ 1500A
Power Metering: Voltage (V) : +/-0.05% Full-Scale, error +/-0.05% Full-Scale
Current (A) : +/-0.05% Full-Scale, error +/-0.05% Full-Scale
Temperature Drift: +/-0.02%/°C
Temperature Monitoring: Temperature sensor with 1-meter cable
range -40°C to 75°C
Status Indication: LED indication for power
LED indication for input presence
Operating Environment: Temparature : Min. – 35°C – Max.80°C
Humidity : Min.20% – Max.80% (Non-Condensing)
Inputs: 1x sensor RJ45 Port
Hardwired with following plugs :
– Phoenix connector for voltage
– Phoenix connector for temperature
– Phoenix connector for external current transformer
Customer reviews
No reviews were found for AKCP - Model BATTMON - Battery Health Sensor. Be the first to review!