APEX - Liquid Level Aerosol
The Apex element is specifically intended to keep annular velocities constant across the entire height of the element. This was accomplished by introducing a gentle taper in the element, so that the annular space on the outside of the element gradually increased from the bottom to top, keeping pace with the external gas flow as it exited the element.
-
Most popular related searches
The liquid contaminant enter the gas stream throug...
The liquid contaminant enter the gas stream through any one of a variety of events including phase separation and condensation, compressor lube-oils from compression, chemical addition to pipelines (including corrosion inhibitors), and entrainment from overheads of contact towers resulting in aerosol distributions primarily in the nanometer range.
The Apex element is specifically intended to keep annular velocities constant across the entire height of the element. This is accomplished by introducing a gentle taper in the element, so that the annular space on the outside of the element gradually increased from the bottom to top, keeping pace with the external fluid flow as it exited the element. The high fluid velocities at the circumference of the cylindrical element require the cylindrical elements to be spaced further apart. Apex elements do not have to be spaced as far apart allowing the same flows to be handled in a smaller vessel, implying lower capital costs.
with efficiencies that could exceed 99.97%. APEX+ has been developed to further optimize these advanced separation technologies
- Interception of sub-micron aerosols
- Coalescence into larger and larger liquid droplets
- Mass Transfer of the captured liquids out of the gas stream
Customer reviews
No reviews were found for APEX - Liquid Level Aerosol. Be the first to review!