Aquasentry - Mains Powered Separator Monitors
From Separators & Alarms
The Mains Powered Separator Monitor comes complete with an intrinsically safe control unit and an oil sensing probe. The control unit can be upgraded to be capable of monitoring up to 4 probe units displaying their current status via a 2 x 16 digit LCD (Liquid Crystal Display). Its ‘Output Relay’ enables this status to be signalled to a remote location if required.
-
Most popular related searches
How they Work
The Control Unit continually monitors the condition of the probe units attached by checking their condition approximately every 30 minutes. The current status is then displayed via the LCD on the front of the unit. If an alarm condition is detected, a warning message is displayed. After the separator has been emptied and refilled with water, the control re-scans the probe sensors attached and presuming no alarm condition is detected ‘All Correct’ will be displayed.
Key Attributes
- Location
- Power
- Alert options
- Monitoring capacity
Key Benefits
- Can be located both inside and outside
- Mains powered, solar powered upgrade available
- LCD Display, sounder, beacon
- Can monitor up to two complete interceptor tanks
Customer reviews
No reviews were found for Aquasentry - Mains Powered Separator Monitors. Be the first to review!