Energy Equipment & Supplies In Congo

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

Material: 0.025 in. Thick aluminum alloy 3003 or 3105, H14 temper. 3M Engineer grade Reflective background and one coat of 3M 705 Black ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Deep Cycle Lead Acid Battery with Removable Cover, 24 Volt, 960 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. Pinhole/ Geometry: Pin shape punched in bipolar plate foil. Bipolar plate material: Metal. Connection type: Flexcard. Benefit (USP): Design for ...

Dry desulfurization is to utilize the reducibility and flammability of SO2, using solid oxidant or adsorbent to desulfurize, or directly make it burn. Dry desulfurization is a method to produce Na2SO4 by the reaction of NaHCO3 and SO2, which is called dry ...

A scroll compressor uses two interleaving scrolls to compress air. Devices using this technology are known for operating more smoothly, quietly, and reliably than conventional piston compressors. Unlike pistons, the orbiting scroll’s mass can be perfectly counterbalanced, with simple masses, to minimize vibration. The scroll’s gas processes are also more stable and continuous. ...

The MCM-S02FII module is ideal for evaluating various Inkrementalgebertypen in systems of process engineering, test stands, test equipment, and HIL systems. It is the optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, test stands generator and HIL systems. ...

DI’s compact moveable rotary kiln incinerator is our smallest thermal treatment system and unique in its kind. It’s the ultimate treatment solution for small waste volumes, remote areas, temporary or permanent cleaning projects, disease control and many other ...

Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to produce energy from burning waste. This renewable energy solution is extremely popular and is constantly being enhanced. It can reduce the volume of waste to just 10% in bottom ash for most ...

With the MCM-U16FII module, frequencies, duty cycles and pulse widths can be measured. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. The module is equipped in the best possible for use in harsh environments. Application areas are, among others, test stands, HIL systems and mobile use. ...

The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and compatible with a variety of carburetors and mixers. It can be used with alternative fuels ...

Our i8-40s is a simple and effective incinerator from our small range with suitability for various non-hazardous waste types such as wood, paper, cardboard and other uncontaminated materials. Our versatile range of ‘S’ model incinerators are designed to be multi-purpose. This particular model benefits from a top loading design and very simple operation process. Ideal as a stand-alone ...

The digital I/O module has individually configurable inputs and outputs. The outputs can be used as high-side, low-side or push / pull drivers. Due to the high voltage ranges, the module is also suitable for special applications in the automotive environment. The module is optimally equipped for use in harsh environments. Application areas are, among others, test stands, HIL systems and ...

BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...

Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to get the optimal energy back from the destruction of waste. Inciner8 are continuing to evolve their waste processing technologies. It is clear that these have the potential to contribute to UK & Global ...

Force range: 200 N - Application of force: Rivet on top side - Contacting: Tinned solder pads only - Housing: None. With this compact force sensor, the force is applied to a round-head rivet in the center. The sensor can be mounted very easily in a blind hole with a diameter of 12 mm (0.472 in) and a clearance. Flexible contacting and housing options make this sensor suitable for a wide variety ...

Mast version (GS1/M-10) – includes one metre pole and bubble level. Fitted with 10m cable. Floor version (GS1/F-10) – with integrated levelling baseplate. Fitted with 10m ...