Energy Equipment & Supplies In Guyana

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Material: 0.025 in. Thick aluminum alloy 3003 or 3105, H14 temper. 3M Engineer grade Reflective background and one coat of 3M 705 Black ...

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

The high quality of the materials combined with cutting-edge technology of the compressor unit, ensure reliability, professionalism and economy allowing continuous use, unthinkable in traditional direct-drive oil-free compressors. The AirGen OFCAS 35 PLUS is the ideal compressor to supply all Zero Air generators ZA FID and ZA TOTAL or the high purity Nitrogen generator NG ...

Direct fired rotary kiln incineration technology has been proven to be the best available high temperature thermal treatment technique for small and medium scale hazardous waste disposal ...

The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

The MCM-R08ABS-SHUNT10A shunt carrier card is designed for project-specific applications of current shunts in current paths, preferably in combination with the MCM-I08AII-BI. 8 administrable shunt values in different designs can this be installed. The max. Current per channel is 10 A, the power supply is done via power terminals, the voltage taps on four-wire technology are available on ...

Sample gas enters the instrument and flows through two (2) standard scintillation counter ready vials filled with ethanolamine, which retain the CO2 component. The sample gas, now less the inorganic CO2, flows through a heated palladium sponge catalyst bed, which oxidizes the sample gas. The oxidized sample gas flows through two (2) more vials with ethanolamine that retain the remaining organic ...

fasdfasdfds afdsa fasdfa fasdfas ...

The i8-140G is the first in our range of high capacity general waste incinerators. Perfect for a variety of waste streams such as wood, paper, cardboard and plastics. The i8-140G can be used for a variety of applications. It provides an effective and sustainable waste disposal solution for many different types of industries generating a high daily volume of waste. This models large capacity, ...

The i8-75G General Incinerator is one of the most popular models in our medium capacity range due to its simple, effective use as a multi-purpose incinerator with suitability for disposing of general solid waste and medical waste. Using the same technology and design as the i8-55G, the i8-75G increases the capacity of the primary chamber capacity allowing for greater burn rates and the capability ...

The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

Round, square or spiral, aluminum nails. Round, copper nails. Al nails are 1.5 inches long. Neoprene ...

EVERLAST … Nuts, Bolts & Washers. 010-047000 NBA 5/16th” Aluminum Break-A-Way Nut. Requires a standard wrench or Visegrip for installation. When nut is tight, keep twisting firmly to break off hex ...

The HT10E power unit is driven by a 10HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S6P. Other hydraulic tools and equipment may also operate from this power ...