Energy Equipment & Supplies In Kyrgyzstan

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

Material: 0.025 in. Thick aluminum alloy 3003 or 3105, H14 temper. 3M Engineer grade Reflective background and one coat of 3M 705 Black ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Fluorotherm™’s Immersion Coil Heat Exchangers have been proven worldwide in a vast range of applications since 1965. Ruggedness of design, a vast experience base, internal control of all aspects of specifications and manufacturing, and unmatched technical support are the key reasons behind customer loyalty over the decades. Fluorotherm™ heat exchangers possess corrosion ...

With the MCM-25A K08DBI assembly eight signal channels can be switched in each case to the two signal outputs. By the use of the relay, the individual channels are electrically isolated from each other. The MCM-K08DBI-25A module is ideal for switching signals in testing and test systems. The module is suitable for switching high currents, as they occur in the ignition or injection into engine ...

Dry desulfurization is to utilize the reducibility and flammability of SO2, using solid oxidant or adsorbent to desulfurize, or directly make it burn. Dry desulfurization is a method to produce Na2SO4 by the reaction of NaHCO3 and SO2, which is called dry ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

The MCM-S02FII module is ideal for evaluating various Inkrementalgebertypen in systems of process engineering, test stands, test equipment, and HIL systems. It is the optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, test stands generator and HIL systems. ...

DI’s compact moveable rotary kiln incinerator is our smallest thermal treatment system and unique in its kind. It’s the ultimate treatment solution for small waste volumes, remote areas, temporary or permanent cleaning projects, disease control and many other ...

Specac’s Atlas Power hydraulic press is available in 8 Ton, 15 Ton, and 25 Ton load configurations for industrial XRF applications and other laboratory sample pressing ...

This portable and rugged diesel power pack is ideal for driving our 3" trash pumps and even our 6" high-volume propeller pump. It also can provide hydraulic power to run many other hydraulic tools using the variable speed throttle to control hydraulic ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

BSG 12, 32, 42 and BSG 20 Ex - for DataPro, SonicPro, EnerPro and IsoPro surge ...

Our specialized media is used to detect microorganisms in diesel fuel specifically. This type of culture media is designed to monitor microbial contamination in fuel, which can result in sludge buildup, fuel degradation, and potential damage to storage tanks and engines. It is used in industries that require clean fuel systems, such as automotive, marine, and aviation, where microbial ...

Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...

The HT30EV power unit is driven by a 30HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S4CSL, S4VHL and S4SHR. Other hydraulic tools and equipment may also operate from this power ...

Waste to Energy has become something of a talking point when the subject of processing waste is discussed. Here at INCINER8, we have spent many years researching and developing new ways to get the optimal energy back from the destruction of waste. Inciner8 are continuing to evolve their waste processing technologies. It is clear that these have the potential to contribute to UK & Global ...

Force range: 200 N - Application of force: Rivet on top side - Contacting: Tinned solder pads only - Housing: None. With this compact force sensor, the force is applied to a round-head rivet in the center. The sensor can be mounted very easily in a blind hole with a diameter of 12 mm (0.472 in) and a clearance. Flexible contacting and housing options make this sensor suitable for a wide variety ...

The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...