Energy Equipment & Supplies In Latin America

Foam traps on digesters serve for the visual recognition of foam build-up on the sludge surface. Should foam be detected a spray film is generated through a spraying unit, which eliminates the foam on the surface of the sludge, thus, preventing the ingress of foam into the pipework. ennox foam traps can be delivered either as a manual or fully automatic unit, as well as with an under/over ...

I8-PC2 incinerator is specially designed for pet cremation. It features a controlled air incinerator with a front-loading design for easy access to operators. The i8-PC2 is unique in its design as it is self-contained with a rear access door consisting of a mounted control panel and an integrated fuel tank. This allows for a quick and simple on-site installation process with the whole unit being ...

With the function tester for ABS control units, individual function modules of the control unit hardware can be tested. For this purpose, various simulation and measurement technology components from the MCM product family are installed in the test system. Special loads can be connected via an additional load connector. If the built-in measurement and stimulation channels are insufficient, ...

The HT74DJV features a John Deere 4 cylinder water cooled diesel with your choice of fixed displacement gear of pressure compensated piston hydraulic pumps. It is designed to drive our submersible pumps or other hydraulic equipment requiring flows to 40 GPM and pressures to 2500 ...

The condensate accumulator is used for both the collection of condensate water within the gas system and for drainage. Normally the condensate accumulator is integrated directly into the lowest point of the pipework by means of a flange connection. The condensate water flows into the collection container and is drained either through a ball valve, or automatically with a condensate drainage unit. ...

Several trials have been conducted to showcase the diversity of the technologies capability to adjust to different feedstocks. An anerobic digestor operator in N. Ireland, displaying high levels, of hydrogen sulfide at 270 ppm and low methane output. The trial was conducted with daily treatment of BGE1 and BGE2 on an 600,000-gallon anaerobic digestor with a combined feedstock of grass, chicken ...

Deep Cycle Battery with Cover, 24 Volt, 240 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

Unpainted, embossed aluminum or brass. Raised embossed copy last the life of the pole. The highly defined characters are legible forever. Please specify ...

The i8-1000A is the biggest machine within our agricultural range and is at the forefront of combustion technology - offering impressive burn rates and large batch sizes while still achieving some of the lowest emissions in its class. The i8-1000A can be customised with viewing windows, external cladding and automatic loading to provide an effective and sustainable waste disposal solution for ...

In a CAPFPR, the monomers, solvents, and catalysts are continuously fed into the reactor at one end. The agitator(s) inside the reactor ensure that the mixture is well-stirred, promoting even reaction conditions. As the reaction progresses, the polymerizing material moves through the reactor in a plug flow fashion, exiting from the other end once it has reached the desired conversion and ...

The HB-SC-50 liter Hydrogen Fuel Cartridge is designed to be used as a standard storage for our portable FID based instrument and to act as a back up hydrogen source at room temperature. This hydrogen storage system is based on the latest achievements in solid metal hydride technology of AB5-type alloys as well as on unique techniques of alloy loading. It allows to store and release the gas at ...

fasdfasdfds afdsa fasdfa fasdfas ...

testing ...

Tech's decals are overlaid with a clearcoat, polyester laminate. These all weather, solvent resistant decals are pressure sensitive with permanent acrylic adhesive. Clear and durable with a temperature range of -50T to 275 F. Minimum application temperature 41 F. Excellent dimensional stability, and no measurable ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the combustion ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables temperature regulation, and prevents excess water ...

The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...

Pulling force: 51 tons @ 4,000 psi. Piston area: 25.13 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 138 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

The MCM-S02FII module is ideal for evaluating various Inkrementalgebertypen in systems of process engineering, test stands, test equipment, and HIL systems. It is the optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, test stands generator and HIL systems. ...

The HT150EV power unit is driven by a 150HP 460 V, 3Ø, TEFC electric motor for use where electric power is available. It is designed to drive several of our pumps or other hydraulic equipment and tools. Several control options are ...