Energy Equipment & Supplies In Panama

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Material: 0.025 in. Thick aluminum alloy 3003 or 3105, H14 temper. 3M Engineer grade Reflective background and one coat of 3M 705 Black ...

The ALV10 is an air-fuel ratio controller designed to improve combustion efficiency and reduce emissions in industrial engines. It utilizes a precise control algorithm to adjust the air-fuel ratio in real-time, ensuring optimal combustion under all operating conditions. The ALV10 can be easily integrated with existing engine control systems and features a user-friendly interface for easy ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

The MCM-S02ABS assembly serves as a carrier card for the two nAW1 modules Inductive and Digital to incremental signal ...

AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market ...

The MCM-R08ABS-SHUNT10A shunt carrier card is designed for project-specific applications of current shunts in current paths, preferably in combination with the MCM-I08AII-BI. 8 administrable shunt values in different designs can this be installed. The max. Current per channel is 10 A, the power supply is done via power terminals, the voltage taps on four-wire technology are available on ...

Fluorotherm™ shell and tube heat exchangers are used for in-line heating and cooling applications for corrosive and ultrapure fluids. These units have been designed with efficient heat transfer as the primary purpose, offering a baffled cross flow heat exchanger. Our shell and tube heat exchangers are commonly used for oil refinery and chemical processes applications, and while they're ...

The i8-140G is the first in our range of high capacity general waste incinerators. Perfect for a variety of waste streams such as wood, paper, cardboard and plastics. The i8-140G can be used for a variety of applications. It provides an effective and sustainable waste disposal solution for many different types of industries generating a high daily volume of waste. This models large capacity, ...

This Honda gas portable power pack is ideal for driving our 2″ trash pump and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

I8-250G model is the first of our larger format models. It has the internal capacity to handle larger single items that can be easily loaded via its wide primary chamber door. The model features a high capacity primary chamber and is capable of large continuous burn cycles that can be used for a variety of applications. It is suitable for various waste streams such as wood, paper, cardboard ...

Fluorotherm™’s Immersion Coil Heat Exchangers have been proven worldwide in a vast range of applications since 1965. Ruggedness of design, a vast experience base, internal control of all aspects of specifications and manufacturing, and unmatched technical support are the key reasons behind customer loyalty over the decades. Fluorotherm™ heat exchangers possess corrosion ...

The KOLLER Slickline Alu Unit has been designed for workover activities with special weight restrictions. The 2-skid layout is separated in a winch / operators module and a hydraulic power pack. The hydraulic pump / motor combination guarantees high pull force and speed at any depth. The unit starts with a spring-starter which makes the system independent of any external power supply. The modular ...

It is suitable for disposing of horses, cattle and other large or bulky agricultural waste streams. This system benefits from a wide opening door and high hourly burn rates which makes it a preferred disposal solution for farms, shooting practices, slaughterhouses, abattoirs, veterinary practices or similar facilities with high quantities of agricultural waste. One of our newest designs is the ...

180A/60% ED, Euro central connection, pistol grip, M6*25/0.8 mm contact tip, 12 mm conical gas nozzle. The CastoPlus 156G is a gas-cooled MIG/MAG welding torch designed for demanding welding applications. With a power rating of 180A at 60% duty cycle and a Euro central connection, this torch offers high reliability and efficiency. The ergonomic pistol grip ensures comfortable handling, while the ...

The 1″ Pipe-Pulling Adapter is used when attaching a new 1″ P.E. pipe to be pulled in behind the 1″ Water Line Bursting Heads (such as TT-WDGE-3WED). The Manufacturer’s user guide is provided under the ‘Documents’ tab. ...

The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...

EVERLAST … Nuts, Bolts & Washers. 010-047000 NBA 5/16th” Aluminum Break-A-Way Nut. Requires a standard wrench or Visegrip for installation. When nut is tight, keep twisting firmly to break off hex ...

The HT10E power unit is driven by a 10HP electric motor for use where electric power is available. It is designed to drive several of our pump models including the S3T, S3TC and S6P. Other hydraulic tools and equipment may also operate from this power ...