Energy Equipment & Supplies In Qatar

A versatile power-to-heat solution from Bosch for local and district heating, building heating, process heat or as redundancy for other energy generators. - Generating heat 100 % electrically – without any flue gas - Reducing CO2 emissions: Using surplus power from photovoltaics, hydropower and wind power - Electric heat system from a single source and simple system integration - Fast ...

Material: 0.025 in. Thick aluminum alloy 3003 or 3105, H14 temper. 3M Engineer grade Reflective background and one coat of 3M 705 Black ...

The KOLLER 2-Split Offshore Wireline Unit has been designed for measurements, slickline and e-line activities with wire capacities above 7,650 m / 25,000 ft. It is suitable for both offshore and onshore applications. The 131 HP guarantees maximum pull force and speed at any depth, even with heavy tools. One of the new features of the power pack is a maintenance free flame trap together with a ...

Pulling force: 38 tons @ 4,000 psi. Piston area: 19.24 square inches. Hydraulic flow rate: 10 to 30 GPM. Cable size: 3/4″, 7/8″. Puller weight: 155 pounds. 12” pulley base: 131 pounds (15” L x 14” W x 19” H). 24” x 1” steel resistance plate: 50 pounds. Pipe materials, routes, and ground conditions vary greatly. Please consult TRIC technical support ...

A cell contacting unit CVP (Cell Voltage Pickup) is a multichannel potential tap for detecting cell voltages on batteries or fuel cell stacks. Depending on the stack used, different construction principles are employed. The CVP pictured here is just one ...

Cell scanning: Single Cell SC (1C). Contact design: 0.4 mm spring wire with W-shape. Contact bearing: In printed circuit board two-sided. Interlocking type: Vertical-Pressure-Lock. Contact pitch min.: 1.200 mm. Pinhole/ Geometry: Pinslot rectangular, 1 mm depth. Bipolar plate material: Metal. Connection type: Wired. Benefit (USP): Extremely flat design („installation space neutral CVP ...

The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...

A finned tube heat exchanger is specifically designed to enhance the efficiency of heat transfer by increasing the surface area over which heat can be exchanged. This type of heat exchanger is commonly used in various applications including air conditioning, refrigeration systems, and industrial processes where heat recovery is crucial for energy ...

The BEAM 3.0 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.0 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / 3D Laser melting). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.0 has been developed to meet specific requirements in term of gas, ...

The MCM-S02FII module is ideal for evaluating various Inkrementalgebertypen in systems of process engineering, test stands, test equipment, and HIL systems. It is the optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, test stands generator and HIL systems. ...

The MCM-U08 AII module is ideal for measuring unipolar voltages in test benches and test systems. Use the module to monitor the voltage of the fuel cell, battery stacks, lithium-based batteries and electrolyzers. It is optimally equipped for use in harsh environments. Application areas include starter test benches, engine test stands, generators test stands, HIL systems and test benches for ...

DI’s compact moveable rotary kiln incinerator is our smallest thermal treatment system and unique in its kind. It’s the ultimate treatment solution for small waste volumes, remote areas, temporary or permanent cleaning projects, disease control and many other ...

Packed Tower Gas Absorber: The Clean Air Group, LLC Packed Tower Gas Absorber utilizes a vertical counter-current design for highly efficient absorption of a variety of toxic gases. In addition to its extensive uses in air pollution control, the Packed Tower can serve as a gas/liquid contactor in a number of process applications. Efficiencies of 99.9% and greater are not unusual for many ...

Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...

Texas Boom offers the Leeagra DOT 500 Diesel Fuel Trailer. This trailer is built to be safe because it’s strong. Offering 500 gallon storage and transport of class 3 combustible materials. With all the features highlighted below, the DOT 500 is in a class by itself to meet your fuel hauling ...

Deep Cycle Battery with Cover, 24 Volt, 240 Ah (at 20 hr.). Some 24 Volt batteries do not come with a cover, the image is for illustration purposes ...

The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...

This Honda gas portable power pack is ideal for driving our 2″ trash pump and slim-line borehole pump. It also can provide hydraulic power to run many other hydraulic tools. Two models are available with flows of 3 GPM @ 2500 PSI or 4.5 GPM @ 1800 ...

Inciner8 now offer a full range of containerised incineration systems, placing us at the forefront of the latest transportation and industrial trends. Containerisation enables immediate waste management as the units are fully assembled and pre-installed. ...

For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell stack without the need to integrate a real stack into ...