Aysix - Model LTX20 Series - Capacitance Diesel Fuel and Oil Level Sensor
From Level - Weight, Continuous & Point
The AYSIX LTX20 series fuel capacitance level transmitter is designed to measure level of fuels and oils in metalic and non-metalic tanks. The probe measures level by measuring the change in capacitance as level changes in the tank. The micro- processor based electronics converts this capacitance change into a linear, highly accurate 4-20 mA signal. The LTX20 includes a standard 4 - 20mA loop powered LTX transmitter, a concentric 0.75 -inch diameter concentric shield with 0.188 - rigid sensor for ranges up to 10 feet. Probe material is SS316. The LTX20 is designed for tanks which have fitting connections of 3/4” NPT or larger and in applications where the liquid is relatively clean or non-clogging.
-
Most popular related searches
An excellent application for the LTX20 are station...
An excellent application for the LTX20 are stationary or mobile generators. This level sensor is shock resistant and very rugged. There are no moving parts. To isolate for ground loops, a non-conductive reducer ( such as PVC) can be used between the tank and the 3/4” NPT fitting of the LTX20.
Features:
- For fuel oil tanks
- Compact 3/4 in NPT concentric tube design
- Accuracy 1% of span for constant dielectric of material
- Tube and inner probe SS 316
- For use with metalic and non-metalic tanks
- OEM applications, low cost
- Continous loop powered 4-20mA operation
- Non-interactive zero and span calibration
- Do not use with Water and other conductive liquids, conductive acids
- Do not use with Materials corrosive to SS 316
Benefits:
- Diesel fuels
- Hydraulic oils
- Vegetable Oils
- Chemical holding tanks
- MEK and other solvants
- Many other, non-conductive liquids.
Specifications
General Specifications
- Supply Voltage: 12 VDC - 36 VDC
- Output: 4 - 20 mA , loop powered
- Max Loop Res.: ( Vs - 10 )/ 0.02 ( 700 Ohm at 24VDC )
- Calibration: Via 4 push-button switches non-interactive ZERO and SPAN
- Capacitance Range: 10 pF to 10000 pF, jumper selectable in 3 ranges
- Accuracy: +/- 1% of full span ( constant dielectric)
- Repeatability: +/- 0.1% of span
- Damping adjust: 0 - 30 sec
- Ambient Temperature: -40 to 70 C ( -40 to 158 F)
- Mounting Thread: 3/4 in NPT standard
- Process Temperature: 200 C max (392 F)
- Probe + Tube material: Stainless 316, 3/4 in (19 mm) O.D.
Engineering Specifications
Enclosures
- AH2: Aluminum, lift cover type, NEMA 4
- SS2: Stainless 316, NEMA 4X
- AX3: Aluminum Epoxy Coated, Class I, Gps. B,C&D, Class II, Gps. E,F&G, Class III, CENELEC: EExd IIC, IP66, NEMA 4, 7BCD, 9EFG
- CX3: Aluminum Epoxy Coated, Class I, Class II, Div 2,Gps. C&G
Pressure Limits :
- 100 psi ( 34 bar ) @ 25°C (77 °F)
- 14.5 psi ( 1 bar ) @ 200°C (392 °F)
Customer reviews
No reviews were found for Aysix - Model LTX20 Series - Capacitance Diesel Fuel and Oil Level Sensor. Be the first to review!