CBS ArcSafe - Model RRS-2 - Extractor Remote Racking System
The RRS-2 is a universal remote racking system capable of removing or inserting low- and medium-voltage non-rotary circuit breakers while the operator remains outside the arc-flash boundary. This device is portable, weighing less than 200 pounds, and user-friendly, requiring no modifications to the switchgear or circuit breaker.
Details
Each system will be custom designed to fit your circuit breaker needs.
Model RRS-2 is used with circuit breakers that use non-rotary methods to install and remove the breaker, and therefore require an extraction-type mechanism for insertion and removal.
Benefits
- Remote operation places operator outside the arc-flash protection boundary
- Compatible with low- and medium-voltage circuit breakers produced by all major switchgear manufacturers
- Use with lever-style breakers
- Easily adjustable height and angle of tooling
- Quick-connect and -release drive actuators simplify setup
- Over-racking protection is provided
- Uninterruptible power supply
- Hand-truck design provides easy mobility
- Aids compliance with NFPA 70E relative to protecting personnel by using external circuit breaker rack-out devices
For Universal Extractor Remote Racking Systems
- CCM Radio Remote
The CCM radio remote option allows users to operate the RRS and monitor the racking status wirelessly from up to 300 feet away. Ideal for users with extended distance requirements or who wish to monitor the status of the racking operation remotely. - Wireless/Wired Video System
The wireless/wired video system allows users to monitor the remote racking operation from up to 300 feet away using an RRS mounted camera and stand-alone monitor. Ideal for users who will be visually separated from the RRS during the remote operation. - LED Light for Extractor Remote Racking SystemLED Light
The LED light accessory adds a forward-facing, high-intensity light source with pan and tilt capability to the front of the RRS. Ideal for personnel setting up the RRS or installing RRS tooling in low-light environments. CBS ArcSafe remote racking system waterproof cover. - Water-Resistant Cover
It is recommended that the RRS be stored in a dry, temperature-controlled environment. However, because this is not always possible, CBS ArcSafe offers a water-resistant cover that protects the RRS from contact with small amounts of liquid from above. - Pneumatic Tires
The air-filled pneumatic tires provide a cushioning effect and reduce wear on the RRS unit during transport. Ideal for customer applications where transportation or use on uneven, rocky, or gravel surfaces is likely to occur. - Wired Pendant Extensions
The wired pendant extension(s) allows users to operate the RRS from extended distances while remaining tethered to the unit. Ideal for use in facilities with extended distance requirements that also restrict radio-controlled device transmission. CBS ArcSafe remote racking system stair climbers. - Stair Climber Rails
The stair climber rails provide a low-friction surface for use when transporting the RRS up and down stairs and provide a level of protection to the control cabinet during everyday use. Ideal for applications requiring transportation up or down stairways. CBS ArcSafe high lift allows racking of breakers up to 84' or 100' high. - High Lift
The high-lift option is required to remotely rack any equipment with a racking mechanism over 66 inched off the ground. Ideal for users who wish to rack breakers with extremely high racking mechanisms that would otherwise cause issues during manual operation. - Front-castersFront Casters
The front casters allow for maximum mobility even in the tightest spaces, simplifying installation and setup in these locations. Ideal for tight or constrained areas where users may otherwise have difficulty maneuvering the RRS.
Customer reviews
No reviews were found for CBS ArcSafe - Model RRS-2 - Extractor Remote Racking System. Be the first to review!