Ekopal - Model RM Series - Biomass Boilers
From Boilers and Heaters
They are batch boilers with power from 40 to 700kW, designed for burning straw. These boilers can also be fired with wood, chips, energy willow, textile wastes, sawdust and other biomass.
-
Most popular related searches
Products Details
The maximum boiler capacity for the Ekopal straw is 700kW, but it is possible to combine units in series, eg 3 EKOPAL RM 03-2 boilers with 1.5 MW boiler. Boilers burn fuel quickly and efficiently. The combustion speed is controlled by the processor (it always maintains optimum conditions in the combustion chamber). Any excess heat that can not be collected is stored in the storage tank.
Boiler for straw Ekopal RM is equipped with a diesel fan with automatic damper and a microprocessor control system, which runs the straw combustion process according to set parameters. The blower feeds the primary and secondary combustion air. The fuel chamber is lined with a chamfer at the bottom. This part involves burning fuel with controlled oxygen deficiency. Gases flow to the second, lined chamois, mixing with secondary air. In this chamber is burning gas. From the afterburning chamber the gases flow to the exchanger. This is the so-called. Combustion Combustion System
“, Which ensures proper gasification of the straw and combustion of the resulting gas and consequently a low carbon monoxide (CO) content in the exhaust gas.
EkopalRM straw boilers work only in open systems. They are mounted to the installation via an accumulation tank. Properly sized storage tank is very important for boiler operation.
When designing a boiler room, consider the excess power compared to conventional fuel boilers, so when selecting a boiler you should suggest the maximum heating surface rather than the power. Well-chosen biomass boiler EKOPAL RM needs 2-3 straw loads per day (cyclical).
The boiler feed rate is reached when the boiler is in operation and the optimal fuel is 15% humidity during sunbathing.
In the case of agricultural holdings it is always worth analyzing the potential uses of heat for production. In many cases, instead of limited to heating the house, it is profitable to warm up, using your own straw, livestock buildings, greenhouses, mushrooms, etc., and by the way home.
EKOPAL RM straw boilers have very good economic effects. The straw burns completely in them, and the heat is stored in the storage tank for later use. Consequently, straw consumption is low. About 8 tonnes of straw for the heating season is needed to warm a typical 200 m2 single family home. This amount of straw is usually collected from 3ha of field.
Straw bales of 80x40x40 cm, 180x70x120 cm, 250x120x80 cm or round, Ø 125-170 cm, are loaded depending on the type of boiler. Moreover, in all types of straw boilers EKOPAL RM can be burned waste and wood chips, textile wastes, sawdust and other types of biomass.
Very good performance parameters of our straw boilers Ekopal appreciated not only from Poland but also from Denmark, Norway, Sweden, the Czech Republic, Slovakia, Scotland, France, England, Croatia, Belarus and Kazakhstan. Since 1993, we have exported over 800 boilers to Ekopal straw.
Application
Poland has already installed more than 700 Metalerg biomass boilers with a total capacity of about 84 MW.
Our EKOPAL RM biomass boilers include:
- detached house
- blocks of flats (eg. at former PGR)
- greenhouses
- piggeries
- chicken coops
- driers
- schools
- Municipal offices, etc.
Individual households use straw boilers RM 2 to RM 30, suitable for burning small rectangular bale sized about 40x45x80 cm.
Boilers for straw RM 38 to RM 03-2 are suitable for mechanical loading of round bales with a diameter of 125 – 170 cm. In the boilers RM 03-2 and RM 03-3 can also be burned rectangular large bales of high crumb.
There are also built-in 1-1.5 MW boiler houses, where 2 or 3 of our biomass boilers are installed.
Examples:
Boiler room in Primary School No. 2 and Music in Milicz – 3 boilers for straw power of 400 kW, total power is 1.2MW
Boiler house in Primary School in Jemielno – 2 straw boilers with power of 400 and 500 kW, total power is 0.9MW
Boiler house in a housing estate in Łabiszynku – 3 straw boilers with a capacity of 500 kW, total power is 1.5MW.
Installation Guidelines
Ekopal RM straw boilers are batch boilers designed to produce water up to 95 ° C and can only be operated in open systems.
The basic feature of the straw feeder is that the combustion process runs at the same speed according to the flue gas temperature (eg 230 ° C) set in the control system. In a relatively short period of time, the amount of heat that is normally unable to take over the heating system is generated. Therefore, in the boiler room boiler technology, an accumulation tank is needed to collect the heat generated by the combustion process. This tank provides complete heat reception from the combustion of subsequent straw loads. Hot water is drawn from this tank to the heat distribution network according to the required demand. The basic diagram of the heating system with the Ekopal RM straw boiler and the storage tank is shown below:
It is important to have the best thermal insulatio...
It is important to have the best thermal insulation of the accumulation tank, which limits heat losses.
The capacity of the tank depends on the size of the boiler. For the straw boilers Ekopal RM we recommend the following minimum storage tanks capacity (larger capacities improve the efficiency of the boiler room):
Customer reviews
No reviews were found for Ekopal - Model RM Series - Biomass Boilers. Be the first to review!