FTM - Charcoal Briquette Machine
From Briquette Machine
The charcoal briquette machine is designed for the shape of charcoal, pulverized coal, coke, coal slime, coke dust, lignite, anthracite. This knid of charcoal machine uses cold pressure molding technology and is the more common molding equipment in the market. The production of carbon pellets is mainly used for barbecue, civil, industrial, gas and so on.
Products Details
Introduction of charcoal briquette machine
The charcoal briquette machine is designed for the shape of charcoal, pulverized coal, coke, coal slime, coke dust, lignite, anthracite. Charcoal briquette machine uses cold pressure molding technology and is the more common molding equipment in the market. The production of carbon pellets is mainly used for barbecue, civil, industrial, gas and so on.
Charcoal briquette machine can well shape a variety of coal, coke, charcoal, desulphurization gypsum powder, activated carbon, coke, coal slime, and other powder, waste, tail material. Materials processed are not only easy to be transported but also can be recycled and reduce dust.
After technical innovation, charcoal briquette machine not only can be used for processing the charcoal, but also can be used to suppress activated carbon, sludge, gypsum, kaolin, iron powder, aluminum powder, iron oxide sheet, fluorite, slag tailings and other materials, which is widely used in the field of power plants, metallurgy, chemical and other industries. This charcoal briquette press machine can operate on its own but has its own charcoal briquette machine line.
FTM Machinery which is a Chinese famous charcoal briquette making machine factory has many types of charcoal briquette machines, including charcoal briquette machine, sawdust charcoal briquettes machines, lime briquette machine, big briquette machine, coal briquetting machine and small briquette machine. And the price of charcoal briquette machine is cheaper than other manufacturers under the same quality. Our customer in Kenya had bought for his production of charcoal, and he was very satisfied with briquette machine for sale because of low prices but high prodction.
Charcoal briquette machine line
- Continuous feed bin. It stores raw materials and delivers them evenly.
- Screening machine. Screening the raw materials that is not up yo the requiremnet of pressing ball particles.
- Compound crusher. Crushing the raw materials that can’t meet the requirement.
- Double shaft agitator. Stirring the raw materials that content of water is less than 8-12% to ensure the normal supply and production of follow-up equipment.
- Charcoal briquette machine. It presses the mixture into a ball.
- Conveyor. Ensure the normal supply of the whole production line.
Installation and precautions
- Check whether the electrical parts are normal before starting. Check that the die holes on both rolls are aligned. If not, open the gear guard and loosen the six screws. Work roll spacing should be maintained between 0.4 and 0.7mm. If it is too small or too big, it can loosen the passive roller and the bearing. When starting work, check whether the double rollers are compatible. In case of error, remove the gear shield, loosen the passive roller gear ring screw.
- The main machine (hydraulic molding) shall first check whether the electrical equipment is working normally and whether the steering wheel of profile roll and hydraulic mercury is turning in the right direction. When everything is all right, add the mechanical oil into the reducer. And the hydraulic oil is added to the hydraulic mercury tank. Starting pressure test, the pressure value is between 11MPa and 13MPa.
- If the clutch slips in the production of mixer, the fixed wire on the three jaw frame can be adjusted. According to the output, adjusting the angle of mixing blade on the double shaft to ensure the main machine using materials. Additives can be added in the blender.
- When the conveyor is working normally, you should see whether the belt does not run off. If the belt is not straight, the front and rear roller bearings can be adjusted to match the top wire.
- First of all, adjusting the tightness of boot belt, so that the belt can not run off. Then according to the production capacity of the briquette machine to adjust the size of the gate, so that the amount of material is no more or less.
Here we have sold thousands of charcoal briquette making machines including large charcoal briquette machines and mini charcoal briquette machines all over the world, such as Kenya, Philippines, India, pakistan, etc. If you are interested in charcoal briquette machine price in China, we welcome to all consultings and visitings.
Features
- The charcoal briquette machine features reasonable design, high manufacturing quality, simple structure, small size, small land covering area and power saving, etc.
- The fully automatic control electric heating device can adjust the wet and dry condition of the materials casually, thus guaranteeing the stable forming.
- The main parts of the charcoal making machines are made with special wear-resisting materials, thus realizing the continuous production and durability.
- The charcoal briquette machine is suitable for compressing biomass materials with low energy consumption and high production efficiency,that’s why people also name it biomass briquette machine.
- The design of changing the mechanical heart form one to four increases the stability and durability of the briquette charcoal making machine.
- By increasing the feeding amount, the machine realizes a higher yield.
Customer reviews
No reviews were found for FTM - Charcoal Briquette Machine. Be the first to review!