Green Electric - Model MAT - Green Electric Mat Low-Energy Heater

Lower power consumption adapted to modern low-energy houses

Old buildings often have a heat demand of 140 Watt / m². Many modern low-energy houses only need one-third or even less. Therefore, it was time to develop an electric floor heating which is adapted to these needs. The GREEN ELECTRIC MAT^® has a heating power of 70 Watt / m². It is therefore ideally suited to the challenges of the future.

Heat faster, save energy – more reliable than ever!

Two separate heating circuits in the GREEN ELECTRIC MAT^® thin-bed heating mats allow to warm up very quickly when heating is needed with doubeled power and then maintain the warmth with half the energy. So you can react much more quickly to changes in the weather. This means  you can keep off the underfloor heating more often, since it can be heated very quickly if really necessary. And: The double heating circuit ensures ongoing function of the underfloor heating in the rare event of a defect in a heating circuit.

HEM-SYSTEM® – sleeveless for a minimum in height

Our thin-bed heating mats all have the HEM-SYSTEM®. The transition between hot and cold lead conductors is constructed sleeveless, without thickening the cable. This makes installation of the thin-bed heating mats much easier and also the connection is completely waterproof.

Small or large – Thin-bed heating mats for every room!

The GREEN ELECTRIC MAT^® is available in numerous versions and so ideal for any project

• Operation voltage 230 Volt
• Power output approx. 70/70/140 W/m²
• Cold lead 1 x 4.00 m
• Min. installation temperature +5 °C
• Min. bending radius 6 x dA
• Resistance tolerance -5 %/+10 %
• VDE Regulation according to IEC60800 Ed.3
• Cold-/Warm connection sleeveless splice, without shrink sleeve
• Insulation Fluoroplastic
• Delivery width 0.46 m
• Calculation width 0.50 m