Hydramaxx - Model 2710 - Wheel Trencher
From Wheel Trencher
The new Hydramaxx 2710 bucket wheel trencher from Port Industries provides a safer, more comfortable and productive environment for the operator. The ROPS certified (awaiting final approval) cab assures the highest degree of operator safety. The cab lowers for easy access – just one step off the ground – and rises 48” for maximum visibility. The sealed design of the cab with factory heat and A/C provide a clean and quiet environment. Ergonomic processor based controls positioned on the arm rests, allow access to more systems information, and customized control options to increase performance and productivity.
-
Most popular related searches
Specifications:
General
- Total Overall Weight: 49,000 LB
- Height: 11’
- Width: 11’ 3”
- Length: 42’
- Travel Speeds: TRAVEL SPEEDS
- 1st Low / High: 0 - 2 MPH / 0 - 4 MPH
- 2nd Low / High: 0 - 7.5 MPH / 0 - 15 MPH
Tractor Unit
- Ground Clearance: TRANSMISSION - 27” UPRIGHTS - 23”
- Wheel Base: 12’ 6”
- Front Axle: OUTBOARD PLANETARY WITH LIMITED SLIP
- Rear Axle: INBOARD PLANETARY WITH HYD. DIFF LOCK
- Tires - Standard: 30.5 x 32L - 14 PLY SPADE GRIP (R2) TREAD
- Track Width - Center Line Of Tires: 92”
- Transmission: FOUR SPEED WITH TWO SPEED SHIFT ON THE GO
- Auto / Manual Leveling: 8° RIGHT AND 8° LEFT
- Brakes: INDEPENDENT INBOARD REAR AXEL - HYD. APPLIED
- Elevating Cab (Standard): HEAT AND AIR CONDITIONING (standard)
- Intelligent Processor Based Controls: AUTO LOAD CONTROL (standard)
- System Monitoring: ON BOARD AIR (standard)
Engine
- Make & Model: DEERE 13.5 / IN LINE 6 CYL. / TIER III COMPLIANT
- Gross Horsepower: 425 HP @ 2100 RPM WITH POWER BULGE (450 HP)
- Displacement: 13.5 LITER / 824 CU IN
- Fuel Tank Capacity: 225 GALLON
- Electrical System: 24 VOLT
- Batteries - (2) 8d-Mhd: 1400 CCA RC 450
- Automatic Ether Cold Starting Aid (Standard): OPTIONAL BLOCK HEATER KIT(S)
Digging Wheel
- Digging Wheel Diameter: 97” INSIDE / 126” OUTSIDE
- Digging Wheel Construction: 3/4” x 6” RIMS WITH 1/2” x 3” ATTACHING RING
- Digging Depth Range: 0 - 7’ 3”
- Digging Width Range: 18 - 40” (OPTIONAL 48”)
- Standard Cutting Arrangement: 16” BUCKETS WITH CENTER CUTTERS (22” CUT)
- Sloper Kit: OPTIONAL
- Hydraulic Upright & Digging Wheel Pivot: 14.5°
- Roller Slides: ROLLER (12) - 3”
- Ground Clearance For Transport: UPRIGHTS - 17” BUCKETS - 36”
- Pipe Box: 3 - 12” TILE LAYER, HYDRAULIC BEDDERS
Conveyor
- LENGTH - 8’ (STANDARD) 10’ (OPTIONAL)
- WIDTH - 36”
- LEFT OR RIGHT DISCHARGE W/ 36” SHIFT
Hydraulic System
- 120 GALLON CAPACITY
- TRACTOR HYDRAULIC FLUID
- FILTRATION 25 MICRON RETURNS / 5 MICRON PRESSURE
Customer reviews
No reviews were found for Hydramaxx - Model 2710 - Wheel Trencher. Be the first to review!