KENSHO - Model K37 - Intelligent Diesel Engine Asset Management System
Engine Autostart and Stop on multiple triggers via float switches, Pressure, Vacuum, Level Sensor, SAT/GSM modems, PLCs and RTUs. Bi-directional remote telemetry connection to a PLC and SCADA networks and to a website via Satellite or GSM modem. Bright graphical display showing all engine/equipment data and warning/faults. Complete asset protection on all sensors with built in 'Failsafe' protection. Includes low radiator coolant level detection.
-
Most popular related searches
Software Overview
- Multiple sensor readout, with built in separate adjustable bypass timers and slush timers.
- Robust IP66 module in a powder coated enclosure with tempered see through glass. Will not yellow in exposed sunlight.
- Automatic variable engine speed control via CANBUS J1939, MODBUS or Pulse Width Modulation via electronic actuator. Can also be controlled remotely.
- Save on fuel, running and maintenance costs. Fuel Level monitoring.
- Programmable timers for, 7day 24hour timer and 100hour run timer.
- One panel to suit mechanical engines or electronic CANJ1939 engines.
- Tier 4 emissions ready.
- I/O Expansion Capable.
- In built data logging on all equipment faults.
- Engine Running and Common Alarm outputs.
- Easy to set up and program. Will permit future software upgrades via a computer.
- Connects to various analogue sensors, ie: 4-20mA pressure, flow and depth sensors, including resistive temperature sensors.
Features
- Auto start on 2 floats
- Run to fixed speed with PWM
- Pump pressure protection input
- Pump flow protection input
- Bearing Temp reading/shutdown
- RPM reading overspeed shutdown
- Variable speed control to pump press sensor
- Low oil gauge & shutdown
- Loss of prime protection input
- Engine running relay output
- 100 hour run timer
- variable speed control to pump flow sensor
- High coolant temp gauge & shutdown
- fuel level reading and protection 9.36v Compatible
- Engine hour meter
- 7 day 24 hour Strat/Stop timer
- J1939 CANBUS ready
- MODBUS / Telemetry ready
- Battery voltage monitor display
- Start/Stop engine via pressure sensor
- Configurable Digital Inputs
- Fault history logger
- Start on time and Stop on pump pressure
- Start/Stop Engine on via level sensor
- IP66 Control module
- Low Radiator level shutdown
Reduce Your Operating Costs & Increase The Engine`s Life Cycle?
The K37 engine auto-start controller is designed for the off-road stationary diesel engine market. The software is application driven. The controller’s primary function is the management of your diesel engine and the equipment it is driving. The controller’s software and hardware is designed to reduce the cost of running and owning your asset. It will also reduce your fuel and maintenance costs but most of all increase the engine's life cycle.
The K37 is used in the following applications: Waste water de-watering, irrigation pumping, power generation, air compressors, high pressure cleaners, lighting towers, dust suppression pumping, tank filling, sewer bypass, frost control and fire pumps.
Software Features
- Engine Hours display (Hour Meter)
- Engine RPM display and Overspeed protectionr
- Accepts tachometer RPM signal from:(adjustable)
- Alternator W+
- J1939 CANBUS ECU
- Magnetic Pick Up over a Fly Wheel
- Automatic Engine Speed control from: (adjustable)
- Go To Fixed RPM set point
- MODBUS throttle commands
- Discharge pressure sensor
- Discharge flow rate sensor
- Dam / Sump level sensor
- Automatic Start and Stop on: (adjustable)
- Single or Duel Float Switches
- Single Pressure Switch
- Discharge pressure sensor
- Can Start/Stop and control engine speed via Website
- Suction/Vacuum sensor
- Dam / Sump level sensor
- 7 day 24 hour programmable Timer
- Engine Oil Pressure display and engine shut down (adjustable)
- Engine Temperature display and engine shut down (adjustable)
- Data logs all equipment fault messages
- Displays all equipment fault messages (J1939 included)
- MODBUS (RS232/485) Communication
- Low radiator coolant level shutdown
- Fuel level reading / shutdown (adjustable)
- Battery Voltage VDC display
- Low Battery Warning)
- Loss of RPM Engine Shut Down (adjustable settings and timers)
- Glow Plug Excitation (requires high Current Relay)
- Loss of Prime Digital Input (adjustable settings and timers)
- 99 hour programmable Stop Timer
- 7 day 24 hour programmable Start / Stop Timer
- Discharge Flow rate control, protection and reading (adjustable )
- Discharge Pump pressure control, protection and reading (adjustable )
- Suction / Vacuum pressure control, protection and reading
- Programmable digital inputs (adjustable settings and timers)
- Programmable pump / bearing temperature sensor (adjustable )r
- Clutch Control relay (optional extra)
- Vacuum priming relay (optional extra)
- Engine Running Output and Common Fault Output
K37 LCD Screen Display
The K37 display unit LCD screen is easy to read with large icons and characters. The LCD screen can be viewed in direct sunlight.
Customer reviews
No reviews were found for KENSHO - Model K37 - Intelligent Diesel Engine Asset Management System. Be the first to review!