DC-DC Boost Converter Equipment & Supplies

The original rack mounted 600W vBoost is capable of connecting multiple PV-modules into a single converter. It is designed for high power and a wide input voltage range that accommodates serial connection of standard crystalline FV-modules or paralleled connection of high voltage thin film modules. While it is still available for deployment, the smaller form factors described ...

The Boost 300 is a monolithic 4-phase interleaved DC-DC boost converter designed to maximize the power generated by photovoltaic panels independent of temperature and amount of solar radiation. Optimization of the power conversion is obtained with embedded logic which performs the MPPT (max. power point tracking) ...

The V3 seriesall-in-one fuel cell PCU converter integrates a fuel cell DC/DC boost converter(DCF), a 24V output DCL, a high-speed air compressor controller (FCC MCU) and ahigh-voltage power distribution unit (PDU). It saves the space of thehigh-voltage electrical system and simplifies the design and installation ...

FRF120, FRF130. FRF140 are boost DC-DC converters: FRF150 is a buck-boost DC-DC converter; Integrate 0-6 optional BOP power distribution outputs. Optional distribution stack AC internal resistance monitoring ...

In DC coupled systems, different energy sources like batteries, fuel cells, UltraCaps, photovoltaic panelse tc are connected via a common DC intermediate circuit. Because of the different voltage levels, "DC / DC Buck Boost converters" must actively connect such loads to a constant ...

The ShapeArray™ Field Power Unit (FPU) is a portable, rugged, all-in-one power and communication device designed specifically for manual data collection in the field. The ShapeArray™ Field Power Unit (FPU) is a portable, rugged, power and communication (interface) device designed for manual data collection in the field. Everything needed for the field is enclosed within a lightweight, ...

A compact power and communication device designed to quickly test and verify ShapeArray installations prior to configuration for automated data ...

Interface units control communications and power between the ShapeArray and the data logger and power supply. The SAA232 interface ensures each sensor contained within the ShapeArray gets the right amount of voltage when it needs it and when properly ground, the SAA232 minimizes the risk of power surge and lightning ...