Biogas Operator Equipment Supplied In Europe

Biogas plants for the anaerobic digestion of the organic fraction of municipal solid waste for the generation of electricity (from 300 kW) and the production of ...

Biogas plants for the anaerobic digestion of the organic fraction of municipal solid waste for the generation of electricity (from 300 kW) and the production of ...

Plants for biogas from dry waste, for the anaerobic digestion of the organic fraction of municipal solid waste with a high impurity ...

The low-price solution for the price-conscious farmer! Robust and compact manual gas flare for burning off biogas at agricultural biogas plants. Perfect for smaller new plants and for retro fitting to existing biogas plants. The operation of the eco gas are with a fermenter pressure of 3 mbar is possible although a minimum ...

Digesters and biogas reactors are normally designed and built to cover relatively low system pressures due to cost implications. In order to carry out effective cleaning of the system, operation of a consumer or transfer of the biogas, it is necessary to increase the operating pressure in the pipework. ...

The condensate accumulator is used for both the collection of condensate water within the gas system and for drainage. Normally the condensate accumulator is integrated directly into the lowest point of the pipework by means of a flange connection. The condensate water flows into the collection container and is drained either through a ball valve, or automatically with a condensate drainage unit. ...

Forming the basis for this is the development competence of this world market leader, as AERZEN has constantly innovated, optimised and completed successfully its compressors since 1943. The biogas compressor series VMX is an oil-injected screw compressor in 5 sizes for volume flows up to *2500 m³/h and 15 bar* overpressure. It is suitable for boosting the intake pressure ...

SensoPower N is a device designed to address the challenges associated with nitrogen levels in biogas plants. Excessive or inadequate nitrogen concentrations can disrupt the operation of biogas systems, notably impacting the proliferation of microorganisms essential for efficient biogas production. This issue is particularly ...

The SensoPower Starter is designed to enhance the efficiency of biogas plant operations by providing an effective initiation point. By integrating this product into your system, you ensure a swift and adequate concentration of active substances tailored to your plant's requirements. This initial boost facilitates a smooth transition to using SensoPower S or ...

pioneer Johann Hochreiter has much experience in the operation of biogas plants. This experience will be the benefit of our customers regarding planning and construction. As an operator and owner of own biogas plants, Hans Hochreiters own interest is, to achieve the best possible efficiency of a biogas ...

OLIGAS products are supplied in biodegradable containers, with a strict maintenance and supplementation schedule based on plant requirements. Their uniquely customized approach ensures that each biogas plant operates at its maximum potential without the operator ever needing to handle the product directly, thus promoting safety and ...

Biogas analysis assists process control and can help to optimise digester operation and maximize methane production. It can also ensure newly installed biogas plant is operating to design specification. PROGECO includes in its scope of supply hand held portable instruments and fixed continuous and automated equipment for analysis ...

The green hydrogen, which is produced without any CO2 emissions, is already being used under the ENERTRAG Windgas brand to supply fuel cells in emergency power supply units. The hybrid power plant consists of 3 wind turbines of the type Enercon E-82 and two engine CHPs, which can be operated with biogas as well as with a mixture of biogas and ...

The carbon hoppers have been designed to effectively and efficiently dewater the carbon prior to entering the kiln. This style of hopper provides a much more user friendly dewatering option and is almost impossible to block. Cutting edge seal design. Provision of a ‘dewatering complete’ signal which avoids subjective and wasteful dewatering downtime as well as ensuring consistent feed ...

We supply insulated biogas tanks in sizes from 500 - approx. 9000 m³ in galvanized, stainless steel, vitreous enamelled or mild steel - or a combination of these ...

Core piece of the 500 kW class is the CHP unit type GG 530 which has been presented first time in late 2012, entered serial production in early 2014 and has been applied successfully since then in many objects. Equipped with an advanced MAN 12 cylinder turbo engine it reaches excellent efficiencies (39,7 % electric and 90,9 % ...

Struvite is growing very fast inside pipelines, pumps, distributing nozzle, armatures and filters systems for solids. Short cleaning intervals reduce the availability of the system. An economic operation is not possible to achieve under this ...

Open flares are the most suitable solution in installations where combustion temperature and flame visibility are not subject to any regulation. The EMR flares family includes units for biogas flows from 10 to 250 Nm3/hr and is characterized by compact dimensions, simplified design, ease of installation. The ST version is an elevated flare and is suitable where the flame outlet ...

The multi-nozzle burner and the particular design, size and features of the combustion chamber allow the burning of biogas at a higher flow than in open ...

Biogas can be used as fuel in electrical power generators (gensets), consisting of a standard diesel engine modified for biogas use, and an alternator. Such electrical power generators are on the market in various capacities from small units of less then 100 kW all the way up to 1700 ...