Burner Equipment Supplied In Europe

The HiMass CAST burner is an exemple for free scaling the CAST-based burner. Based on the requirments of customer the CAST burner can be designed for nearly every flow rate and particle number and mass ...

The miniCAST burner is designed as a compact device with an integrated ignitor and a sight glas for observing the flame state. The burner can be used either for low cost soot generator with lower precision or in combination with external flow or pressure controller for calibration ...

In many applications with difficult operating conditions the exhaust gas temperatures are not sufficient to run exhaust aftertreatment systems like Diesel Particulate Filters (DPF) or Selective Catalytic Reduction (SCR) effectively. A simple burner is often capable to increase the exhaust temperature and make the aftertreatment systems work in the effective temperature range. ...

The Limpsfield LP burner series are characterised by a monoblock structure that means all necessary components can be combined into a single unit, making installation and set-up easier and faster, whilst maintaining highly efficient ...

AZZP-180 type burner is used to burn the following types of fuel: wood waste in form of wood chips, pellet, sawdust with moisture of 40%. Max. granulation of fuel is 30 mm. The device can cooperate with open system central heating boilers. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. ...

For fine size wood waste, suspended combustion systems have been developed, commonly and improperly called "burners". These combustion units are often present in our plants, since in the wood-based panels (industrial sector where we have been involved in technological development), the finishing process is constantly present, which has the result of very fine waste production of ...

Instead of using one big burner, we use separate smaller burner units that our placed around the ...

Even today, customers who rely on the REGEMAT® 250 are optimally equipped for all possible future developments. Especially since the burner has all 'Green Gas Ready' criteria with flying colors. Thanks to their use in recirculating double P-tubes, these systems are ideally prepared for the future of alternative fuels such as operation with green hydrogen. With well over 10 ...

AZZP 50 type burner is used to burn fuel: wood waste in form of wood chips, pellet, sawdust with moisture of 40% and granulation of 30 mm and turf with moisture of 40%. It can cooperate with open heating system boilers. Fuel from the tank is fed into the burner with ceramic lining by means of a driven worm conveyor. ...

The Limpsfield LC burner series offers high efficiency burners ranging from outputs of 0.9MW to 31MW (3 – 110 MBtu/hr). All Limpsfield burners provide high turndowns typically between 4:1 and 10:1. This versatile range of burners can be tailor-made to suit any on-site requirements, and fire a vast range of ...

More then 10.000 BROX burners & process burners with capacities from 50kw up to 41000kw, and more than 800 boilers with heating surface from 25m² uo to 350m² running in various ...

The image shows the 6. generation of the CAST burner since 1999. It consists of an upper and a lower part. Both form a combustion chamber with a stable flame without any further means. The flame can be initialed using a lighter through a opening. Soot particles are formed in the combustion chamber and quenched on the hight of the exhaust pipe ...

This burner works with oxygen instead of air. After commissioning with a support fuel such as natural gas or heating oil, this burner works with almost any combustible fuel. This process can be retrofitted without having to install a new burner block in the existing combustion chamber. ...

The ENETEX burner is a special innovation for TOS and COS systems and air heaters. The oxygen required for combustion is taken directly from the preheated exhaust gas or from the process air before heating. The temperature-resistant design and special formation of the fuel lance and burner basket are responsible for the long service life of our ...

The REKUMAT® C burner series is Green Gas ...

The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame ...

Versatile applicable standard burners for industrial furnaces and thermal process plants. GBC-series with ceramic flame tube for high flame velocities, GBS-series for installation in a refractory tile or with a metallic flame ...

All burners feature high versatility on different types of domestic, commercial and industrial ...

Both the dry kilns with burners in the vein of air that those with heat to the fluid and air possess engines from 5.5 kW and 2,950 revolutions per minute, which have a noise level equal to 85-96dB and their interior is built in metal; moreover are regulated by the inverter and their maximum flow varies from 5,000m3 /h to 18,000m3 /h. ...

BeQuem pellet burner is a very robust and easy-to-manage pellet burner. Robust heat-resistant casting parts ensure long service life and low maintenance costs for the burner. BeQuem 20 is perfect for the homeowner who wants an easy-to-manage and reliable heating system. ...