Cable Testing Equipment & Supplies

One pair. Un rated voltage (KV): 300 ...

One pair. Un rated voltage fKVl: 150 ...

Cable test termination systems are used for high voltage testing of power cables. Before high voltage (AC or Impulse) can be applied the power cable need to be prepared and terminated in a special way order to control the electrical field distribution along the ...

ETL-15 is a cable test van used for testing cable insulation and locating faults in power cables. ETL-15 is compact enough to be mounted even in a minivan, yet contains all the equipment typically found in a fully-featured cable test and fault location system, including burn ...

Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which ...

Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 using a ...

The portable cable test set PGT 36 is used for testing medium voltage cables with extruded insulation (VPE, PE, EPR insulation) and nominal voltage up to 12/20kV in accordance with DIN VDE 0276/620 (CENELEC HD 620). The cable test set works according to the VLF test method. ...

The Syscompact 400 portable is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. ...

TDR Time Domain Reflectometer / Network Analysis / Cable Test. Ensuring your customers stay connected to your network is your number one priority. The 1205CXB TDR is the perfect tool to pinpoint copper cable faults - quickly, easily and accurately. Radiodetection has created the 1205CXB Metallic Cable Analyzer TDR to make finding ...

AT-D Automatic Surface Tension Meter is designed and made as per the National Standard of People's Republic of China GB/T6541-86 (1991) 'Test Methods for Interfacial Tension of Oil against Water by the Ring ...

This model replaces the ground breaking and very popular model HVA30. The HVA30 was upgraded to the HVA34 to accommodate the new testing requirements for 25kV rated cables as per the latest revision of IEEE400.2 testing standard. Arguably the top selling VLF/DC instrument on the market, this instrument has become the standard for ...

The BAUR DPA 75 C delivers clear and reliable measurement results. Compact and robust device for portable use onsite, Test voltages from 0 to 75 kVrms, Repeatable breakdown measurements in mineral, silicone and plant oils, Reliable measurement results due to its short switch-off time (< 10 μs) ...

In addition to standard test signal cables, we also offer customised high-voltage wiring harnesses and adapter cables for your project. All wiring harnesses are manufactured in top automotive quality in our wiring harness factory in ...

The M3Z differs from the M2U in that the M3Z a) employs a different electronic design, b) controls active test points through the software (eliminating the toggle switch seen in the M2U), c) is expandable to 2560 test points, d) allows resistance measurement to be made, so you can check the quality of your connections as well as the value of embedded resistors, ...

The tester includes a 128-point fixture, a probe port, and electronics permitting it to test cables with a maximum of 64 conductors. The price includes a board set, probe, operating software, power module, USB cable, Getting Started Guide, Software Introduction Booklet, User's Manual (PDF), and two-year Product Support Subscription. ...

The MMVNA performs mixed-mode S-parameter measurements in single-ended or dual-ended configuration. MMVNA can be used with AEM’s VNA Manager Pro software providing wide range of configurations of testing environment and measurement result display. MMVNA can also be easily integrated with customers software via TCP/IP socket interface, or by using our commands interface. ...

Surge generators of the PS-Line series are used for cable testing and fault location in low and medium voltage networks. With the PS - Line InterEng offers a series of surge generators wich are easy to operate. The surge voltage is continuously adjustable between '0' and the maximum voltage of the selected voltage level. ...

It is well known that DC testing of aged extruded cable such as XLPE and EPR is potentially damaging to the cable insulation causing premature failure of the cable under service conditions. In addition, DC “proof” or hipot testing has been found to be ineffective in detecting even serious defects in ...

Parking Stops - are designed with safety and durability in mind. Eliminate the need for seasonal painting. Speed Bump Cable Protectors - load tested to 20,000 lbs. Per pneumatic tire. Parking Stops, Speed Bump Cable Protectors, Plus Much ...

The LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go / no-go LED display of the wiring and connection of item under test. ...