Coal Fired Plant Equipment Supplied In Europe

Tractebel Engineering has many years’ of experience in both Pulverized Coal technology CFPPs – from Subcritical to today’s state-of-the-art Ultra-Super-Critical, between 50 and 1000 megawatt – and Circulating Fluidized Bed Technology (CFBT) CFPPs up to 300 ...

Certain coals tend to form slag and sintered deposits in the combustion chamber of the boiler. These slagging effects lead to a reduction in efficiency of the plant and eventually the plant needs to be shut down for cleaning in short intervals. ...

In power generation SO3 measurements provide data to allow the operator to burn fuel in the most efficient way to minimize corrosion of the plant and limit acid discharges to the environment. Monitoring of SO3 is also important where it is formed as a by-product, e.g. in De-NOx systems.In processes where H2SO4 is used or ore with large amounts of sulphur is processed, the SO3 ...

Combined heat and power (CHP) is a way of using the heat from power production for increased efficiency. Conventional energy generation can be very wasteful of heat, even in modern coal and gas fired power stations, where possibly only a third of the energy used to power the stations goes directly to energy production, the other two thirds is potentially lost. It ...

Machines to be applied in large, typically coal-fired power plants. Leading edge technology, both in mechanical and aerodynamic design ensures the best efficiency and reliability either in USC or SC configurations. Full arch admission and full reaction ...

The Uskmouth Power Station Conversion Project (referred to as the Uskmouth Conversion Project) proposes to convert the existing coal fired power plant at Uskmouth Power Station to operate as a plant which would generate electricity through the combustion of waste derived fuel ...

As an operator of a gas power station you are aware of the challenge: gas power stations are important elements in energy-generation mixes with their stand-by duty and flexibility in power generation in line with requirements. Yet the competition from modern coal-fired power plants and renewable energy paints an increasingly complicated picture ...

The IEM Ash Removal System and Deslagger have been designed for the reliable transport of combustion residues in power plants. Due to their special design, they are particularly suitable for use with secondary fuels. IEM FörderTechnik GmbH provides designs for wet or dry bottom ash handling systems, scraper conveyors or apron conveyors in waste-to-energy ...

Combined heat and power plants (CHPs) simultaneously generate electricity and heat on the basis of cogeneration. Due to a higher efficiency compared to the separate generation of electricity (e.g. coal-fired power plants) and heat (e.g., boiler with fuel oil or natural gas), this type of plant contributes to a ...

HEC 9 has been developed as a system for large sized power plant such as nuclear, coal fired and hydro power plants. It has the world's highest performance with short-circuit currents up to 300 kA and it is also highly suitable for retrofits or replacements of old GCBs in air-blast technology. ...

H finned tubes are produced as single or double tubes according to customer specifications. They are especially suitable for dusty flue gases, e.g. economizers in: Biomass plants, Coal fired units, Oil fired units, Waste to energy plants, A straight flue gas flow and an appropriate fin spacing reduce possible ...

FAM designed roller screens are sifting machines whose separation area consists of individual motorized shafts rotating in the same direction. The shafts are furnished with curved triangular or round discs which are mounted eccentrically. The material movement pattern and the arrangement of the rolls ensure a gently rolling throughput of the product. Loamy, sticky adhesions to the coarse material ...

Aker Clean Carbon‘s custom-built mobile test capture facility has been in operation since the autumn of 2008. The prime objective for the Mobile Test Unit is to provide operational data from reliable field tests. The plant will capture CO2 from different industrial flue gases and is equipped with advanced monitoring systems. The facility will verify new design features and ...

The Group of Experts on Cleaner Electricity Production from Fossil Fuels is a subsidiary body of the Committee on Sustainable Energy (CSE) that focuses on activities that significantly reduce greenhouse gas emissions from fossil fuel-fired electricity generation. These activities are developed and implemented with the active participation of UNECE member States, representatives ...

MAN MOSAS - shaping the future of renewable energy. Molten salt energy storage (MAN MOSAS) is an economical, highly flexible storage solution for a wide range of applications throughout the energy ...

Single flow, HP section flow in opposite direction to IP and LP (reverse) flow, single cylinder. This turbine standard has been developed to answer to needs of our customers both in the industrial and utility sector. Full arch, fully reaction HP section version is available as the control stage version, to fit any operational configuration. Machine of this configuration may be realized with or ...

Two cylinders, single LP cylinder. This configuration covers with state of the art performances a broad range of applications: typical are combined cycles, solar and biomass with big flexibility in steam conditions provided by different versions of the same basic standard. Sliding pressure operations with full arch admission is typical although control stage versions can be supplied as well. This ...

State of the art technology allows to reach the highest possible efficiency rate when a compact configuration is requested. Fossil power plants and combined cycles are the usual field of application, also in association with district heating and other CHP ...