Combustion Control System Equipment & Supplies

Electrically charged molecules, or ions, are a natural product of the combustion process. ClearSign’s Electrodynamic Combustion Control technology introduces computer-controlled electric fields to manipulate the movement of these ions and precisely control flame shape and the transfer of heat to, through, ...

Stoichiometric Combustion Control creates a condition in the boiler where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the furnace section of the boiler and CO is formed ...

Stoichiometric Combustion Control creates a condition in the process heater where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the radiant section of the heater and CO is ...

CO/O2 control is the better alternative to the O2 ...

Low nitrogen oxide combustion technology is to improve the combustion equipment or control the combustion conditions, using a variety of combustion means in the furnace to control the production of NOx in the combustion process, in order to reduce the NOx in the tail gas of the ...

The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...

The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up ...

The Nexus® NXF4000 model offers integrated burner management with an electronic parallel positioning and O2 trim combustion control system. The Fireye NXF4000 is an advanced burner management controller with internal flame safeguard, designed to operate burners firing liquid or gaseous fuels. NXF4000 supports up to 4 servos ...

Air flow is admitted into the combustion chamber through a motorized damper, depending on the combustion temperature set-point. An outer shield provides additional protection against radiant heat loss. The flare stack is supplied complete with gas train, control box fitted with touch-screen panel for operation setting and ...

Packaged Combustion Fuel Piping Systems provide tight integration of safety control, instrumentation, and critical burner fuel piping into a unitized system that is Factory Tested before shipping to your plant. Combustion Control Equipment, Burner Management Systems, and Fuel ...

The SWEBO S-series comprises a number of different smart storage tank modules, which are each driven by hydraulic scrapers, to allow the least expensive storage tank (S6) to be constructed in kit form, measuring 2.8 x 1.2 metres (max. 2 wide) and with 2 different wall heights. The storage tank is supplied unassembled, for an inexpensive but high quality solution. The storage tank can handle loads ...

The power analyzer AVL X-ion e-Power is a new modular data acquisition platform that is optimized for electric and hybrid applications. It gives you maximum flexibility and freedom in the development of all kinds of electrified powertrains. It provides the highest level of accuracy and quality results, along with the dynamic test cycle performance that the automotive industry ...

Typically smaller, more customizable than our IAH-R units, our non-recirculating indirect fired heaters are designed to heat your process stream, free from the by-products of combustion. Stelter & Brinck’s non-recirculating indirect fired air heaters offer a low capital cost, medium efficiency solution to indirect heating applications. IAH-NR units are furnished ...

With its class leading 896,000 BTU’s the 900 GTS greenthaw has the heating power to take on the biggest jobs and still has all the great features of our smaller ...

All the great features of the larger Greenthaw models in a smaller footprint. Patented Flow Reverser - Eliminates hot and cold zones in the thaw pattern. Reduces time & fuel costs by up to 50%. Consistent curing temperatures across the entire slab – the whole slab cures faster at the same ...

Diesel fired for optimal flexibility. Enclosed trailer with storage for the heat exchangers, manifolds and hoses. This unit can dry up to 20,000 ...

Janfire Steam Jet from 750kW to 2000kW, 1tph to 3.2tph steam. The Steam Jet Biomass System is unique as it has effectively the smallest foot print in the industry. Janfire System Jet is well proven and been in production for the past 30 ...

I.C.E. has capability to design and supply for all ancillary instrumentation and controls for combustion equipment, such ...

Building onto the success of the CFS 2300, the CFS 3000 has been designed to address the needs of higher volume crematories. Built to industrial specifications, the CFS 3000 uses the latest in combustion and control technologies proven on our industrial equipment. The robust refractory design allows for long life and efficient ...

As controls and automation technologies have advanced, L-Inc® has updated it’s control systems to provide the safest, most efficient, and highly reliable operation while integrating smoothly into existing plant operations. From new equipment to upgrades and retrofits, our systems utilize the latest in Programmable Logic ...