Combustion Plant Equipment & Supplies

Operating Principals: The unit is mainly made up with a shell and tube heat exchanger and a combustion chamber equipped with a modulating burner. The gas containing V.O.C. is preheated passing through the shell and tube heat exchanger up to a temperature close to 450 ÷ 550 °C by mean of the heat released by combustion gases which pass through the shell ...

Operating Principals: The plant basically consists of three vertical chambers filled of high thermal capacity ceramic material (a preheating inlet gas chamber, a heat recovery of purified gas from combustion chamber and a cleaning chamber with fresh air) and a combustion chamber with modulating burner that connect up the 3 chambers. ...

Air and water-cooled horizontal and step grates. Grateless firings and combinations. Stationary fluidised ...

The regenerative combustion plant is based on the concept of achieving a high thermal energy recovery with the aid of large ceramic masses that – during the heat recovery phase – absorb the heat from combustion gases and – during the regeneration phase – release the accumulated heat for the pre-heating of inlet polluted ...

The advantage of catalytic combustion, when compared to the thermal one, is to guarantee the complete oxidation of volatile organic substances at relatively low temperatures, usually 320-450°C. The low combustion temperature, as well as allowing less energy consumption, ensures a negligible production of NOx, a pollutant thet in combustors operating at higher ...

Lower operating costs than conventional thermal oxidation systems by lowering the oxidation temperature necessary for the combustion reaction by means of noble metal catalysts. Ideal for use with unproblematic exhaust air streams (without any catalyst poisons) and pollutant concentrations between 2-10 g / ...

In terms of incineration plants, WEHRLE is the specialist regarding fluidised-bed ...

Fuel gas/liquid skids for combustion plants : it is a modular unit complete with piping, supports, tubing, valve assemblies, filters, instrumentation, wiring on board and junction boxes. Engineering department develops detailed engineering starting from basic information and technical specifications complying with the main international standards and additional ...

The efficiency of technical firing plants gives operators competitive advantages and a winning ...

We have a wide range of used Thermal Combustor, reconditioned to new in our establishment and sold to our customers with certifications and with a 12 months warranty from ...

Combi-Turtle is a combined System (combustor and scrubber) that can break down pollutants of different nature, such as METHYLENE CHLORIDE (halogenated substances) and the STYRENE (typical from oxidation). We believe in the possibility of combining the classic technology of combustion with the proven technology of wet processing, so as to provide combined systems that allow the ...

Innovaterm proposes systems with 2 chambers that can treat air flows from 500 Nmc/h up to 10.000 Nmc/h and more, with the foresight to withstand high temperatures (normally over 500°C) and take full advantage of the low calorific value of the biogas for this application. The activities of cogeneration obtained by biogas combustion (from landfill or from farm)produces tons of ...

ECOTUBE® is a system which is at any time possible to be integrated into an existing plant. The ECOTUBE® is a secondary air tube which can be additionally added, primarily for grate fired combustion including WTE-plants, which as well as an improvement in flow patterns in the chamber can also inject a determined amount of secondary air ...

Modular designed system for direct heating of process air for dryer and post combustion plants. GRIDFIRE-moduls are available in straight, T- and X-shape for capacities starting at 160 kW. The combination of the moduls makes burner capacities up to 25 MW and more ...

Exhaust Cleaning Systems for stationary combustion engines, non-engine combustion processes and industrial boilers. Engine and non-engine combustion processes in stationary and industrial applications are subject to strict legal guidelines, just as 44. BImSchV (Regulation on medium combustion plants, gas turbines ...

Cochran’s ST37 Package Steam Boiler is of horizontal three pass wet back design and constructed in accordance with BS EN 12953. This CE marked boiler is designed to meet the latest European environmental legislation and Medium Combustion Plant Directive (MCPD). Suitable for any application, the design features Cochran’s low NOx, low noise burners ...

The control of a WEISS combustion plant has always had high-priority. For that reason we have ourselves always specified the operating parameters that our plants shall observe. At present the specifications and concepts of the control panel are determined by our own specialists, this means that programming specialists in consultation with ...

Through carbonization and removal of the main part of the volatiles, an upgraded biomass fuel is produced, with favorable combustion properties. Biocarbon has a great potential as solid fuel in small scale boilers and stoves and also industrial co-combustion plants, partially substituting fossil coal. Biocarbon is considered as “green ...

The DD-Jet Cleaning System for on-line cleaning of the radiation passes of boilers in Waste to Energy incinerators and Biomass combustion plants. The system is now installed at 23 WtE plants in Europe.The DD-Jet apply 4-6 concentrated water jet beams from the rotating advanced DD-Jet turbine nozzle complex. The DD-Jet nozzle system provides the ...

The SA ACKE TEMINOX GL burner combines all the benefit s of a modern combustion plant . It is designed for industrial heat and steam generation. It s ef ficient and low-pollut ant combustion complies with the most stringent NOX emissions requirements in place with a low CO and residual oxygen content in the exhaust ...