Cooling Tower Equipment & Supplies

Cooling Towers are used as heat transfer devices to remove heat from processes and disperse into the ...

An EvapTech EX Cooling Tower is an induced draft, crossflow tower custom designed to meet our customers' requirements for cost, footprint, power consumption and ...

Conditioning towers or Cooling towers are used to cool gas in various processes. The cooling towers are customized and designed to suit the individual system design and ...

The dry/wet loading cycle in cooling towers provides an ideal environment for corrosion of the structure. Many of these cooling towers are constructed with concrete, and the reinforcing steel corrodes after a short service life. In addition, larger cooling towers such as those used in the nuclear ...

Fan Motor : 1/6 HP, 110/220V, 1PH, 60Hz. *Electrical hookups are inside the junction box located on fan motor. Cooling Capacity : 45,000 BTU/hr. Air Volume : 870 CFM. Water Inlet : 1.5" . Water Outlet : 1.5" . Tower Diameter : 27 1/8". Tower Height : 50" Operating Weight : 227 lbs. Dry Weight : 84 lbs. Nozzle Type : Round, Female (NPT) Threaded, ...

Dry Cooling Tower or Closed Circuit Cooling Tower mostly used for diesel generators, induction Furnace, Aluminium Die Casting, Hydraulic Power Pack, Compressors. It is a single unit that can provide from 1000 kW to 1500 kW capacities. It is a cooling tower that is used for cool ...

Berg’s line of steel galvanized cooling towers minimize the operating, installation, and maintenance costs associated with both new and replacement cooling tower system projects. The GT Series delivers independently verified, fully rated thermal performance over a wide range of flow and temperature requirements. ...

For applications with a limited residual pressure, we can select a hybrid cooling tower design with a motor-assisted fan to achieve the required fan rotation to deliver the cooling job. ...

SpiraBar enables thermal performance equal to, or better than, any splash bar on the market by providing the most uniform droplet distribution of any splash bar design. More uniform distribution of water and air allows the bars to be installed without a staggered configuration, which older bars required due to water shedding. When paired with Brentwood's SpeedGrid system, SpiraBar installs 50% ...

Midwest Cooling Towers has the experience and expertise to build the right cooling tower for your ethanol plant. Our experienced engineering and design group can offer you the best-cost option for your cooling ...

The YHF forced draft cooling tower is low profile, forced draft cooling tower that is ideal for height limited ...

RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of industrial equipment! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing ...

Dalrada's industrial heat pumps provide simultaneous heating and cooling without combustion and can replace water heaters, steam boilers, chillers and cooling towers. This revolutionary technology uses a non-toxic, non-flammable, environmentally friendly natural refrigerant that’s completely CFC and ...

The BKE plume abatement system is a revolutionary approach to reducing visible cooling tower emissions for power plants. Our system can efficiently and reliably reduce the cooling tower plume at a low cost to the customer, while also being easy to operate and following the strictest safety standards. It can be incorporated into ...

Our Air-cooled Heat Exchangers are the preferred solutions for applications which require a great deal of customisation. Paharpur has forced and induced draught systems with design pressures up to 160 bars, comprehensive process control options and various kinds of finned tubes. ...

The closed circuit cooling tower MCC works in free cooling: the fluid circulates inside a tube evaporator coil. It is suggested as an alternative to open cooling circuits with heat exchangers, since the cooling liquid cannot be polluted by external agents. ...

Corezyn isophrhalic pulrrusion resins are used in diverse applications such as nuclear power plant cooling tower grids, fence stock, tubes and structural shapes, fuse bodies, walkway grids and window lincals. Formulated with a wide range of catalyst and physical capabilities, our pultrusion resins, designated with a prefix of "30," are also available as fire ...

The Double Reduction “A” Series Gear Drives for cooling towers from Amarillo Gear Company are designed as direct replacements for the Marley right angle gear boxes. Since there are no differences in the critical mounting dimensions, the “A” Series will make Marley gear box replacements easy. ...

State-of-the-art Evaporative Gas Cooling and Conditioning Systems. Available Features: Downflow/upflow spray cooling tower design. Dual-fluid compressed air systems. Single-fluid mechanical atomization systems. Hybrid low-pressure assisted single fluid ...

Closed circuit process water passes through the primary circuit of the heat exchanger with its heat removed via the secondary water, cooling tower circuit. Incorporates a Carter open evaporative tower (ie Buckingham, Sandringham or, Balmoral) and a plate type heat exchanger with either 304 or 316 stainless steel plates. The package is complete ...