Electrical Measurement Equipment Supplied In Australasia

SINEAX CAM-POWER is designed for measurements in electric distribution systems or in industrial facilities. Its modular design allows it to be adjusted to individual applications and information requirements in an optimum ...

Having a length of 2 metres, this cable is a 3 mm thin and flexible cable with BNC connector in one end and a Lemo male in the other end. For connection of an electrical signal to a measuring instrument using Norsonic Lemo ...

Suitable for natural, non-aggressive and manufactured gases; nitrogen, carbon dioxide and propane; and other gases upon enquiry. Mechanical counter head for continuous registration and display of total volume without electrical power supply. High measuring accuracy. Gas may flow horizontally or vertically. Optionally with mechanical drive shaft. Special design ...

Special design for aggressive gases is available. Mechanical counter head for continuous registration and display of total volume without electrical power supply. High measuring accuracy. Gas may flow horizontally or vertically. Optionally with mechanical drive shaft. TRZ 03E without mechanical counter – with electronic connection for computers. ...

Special design for aggressive gases is possible. Mechanical counter head for continuous registration and display of total volume without electrical power supply. High measuring accuracy. Gas may flow horizontally or vertically. Optionally with mechanical drive shaft. Built in encoder (optional), no battery ...

Application: The devices are designed for measurement in electrical distribution systems, industrial plants or building automation. They may be used for the acquisition and display of standard electrical variables such as current,voltage, frequency, power and many more. All parameters may be set via the touch screen. ...

Application: The devices are designed for measurement in electrical distributionsystems or industrial plants. They are suitable as a replacement ofanalogue built-in measuring devices as well as a cost-effective alternativeto energy meters. All parameters may be set on site. A Modbus RTU(RS485) interface is available for the connection of the ...

The ABB B23 and B24 are advanced three-phase electricity meters designed for accurate energy measurement in various applications. The B23 model directly connects for up to 65 A, while the B24 is transformer-connected for 5 A, providing flexibility for different electrical setups. Both meters measure active energy with a high ...

Dynamic Ratings advanced design and precisely implemented transformer monitoring, control and communication solutions provide users with many ...

A wide range of functions is included: from on-line voltage monitoring, phase sequence testing, varistor testing, earth resistance measurement with 3 wire and 2 clamps method and illuminance measurement, TRMS current measurement up to RCD tests, line and loop impedance tests as well as diagnostic test enabled by PI and DAR indexes ...

It performs all necessary tests required on photovoltaic installations. This includes all of the tests as required by EN 62446, but also includes I - U characteristic measurements, calculation of STC values as required by EN 61829 and power measurements on Inverter’s DC and AC sides (single-phase only). MI 3109 EurotestPV Lite is optimized for PV tests ...

IEC/EN 61557) and other reference standards for testing (e.g. IEC/EN/HD 60364-4-41,...) as is required for any instrument that performs TRMS current measurements, RCD tests, line and loop impedance tests with 3 (and 4) wires and earth resistance measurements. ...