Flaring Equipment Supplied In Africa

We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open ...

The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater ...

To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. ...

In normal landfill gas flares, for example, the usual minimum methane concentration at which a flare will burn is around 15 to 20% methane. Codes of practice, indeed, suggest that combustion should be halted when methane drops below 20% to avoid the possibility of an explosion. ...

The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion gases at this temperature for an extended period of ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

The Pit Flare (or “Burn Pit”) is usually constructed of an excavation lined with a non-combustible lining of rock or refractory material. Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. ...

AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through ...

AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire ...

Our Titan Demountable Flares, also named demountable derricks, are derrick-supported flares with three, or four leg configurations and overall heights of up to 200 meters. Designed to accommodate several risers/tips on the same derrick structure. Each flare tip has its own set of pilots. ...

AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation ...

Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. ...

Our Peacock Oil Burners are designed to flare liquid hydrocarbons without liquid fallout or soot formation. These burners provide excellent service for well testing operations. When only oil is flared, a high-pressure air or gas source is required to provide additional mechanical atomization to ensure the mixture is a fine mist when it exits the burner nozzle ...

AERZEN process gas compressors are installed as single or multiple stage units in chemical, petrochemical, raw material and energy producing plants and in many other production centres of the processing industry all over the world. The unit is ideally suited for dry compression of all gases in chemical and petrochemical industries. Technical Data: Suction volume flow up to: 75.000 m³/h, ...

Application and savings advantages similar to ROCAM® EXPANDER power torque. Precise and exact flaring. Full bearing of the expander head segments allows heavy loads. Continuous adjustment of the socket size and capillary gap. Optimized action principle with long ...

Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in ...

This intruding air is drawn out of the boundary layer and into the exiting purge gas flow column, thus purging the flare tip. This technology is a standard on various ...

The FFG is easily adaptable to any pilot system which incorporates an ignition tube and may be installed up to 1 mile (1600m) from the base of the flare stack. Both automatic and manual modes are ...

Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the vapors is not a viable ...

The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. ...