Flaring Equipment Supplied In Asia & Middle East

Sunpower is able to reasonably arrange discharge and recycle systems per various discharge components after making a comprehensive analysis of flare discharge gases in order to utilize different flare gas components to a maximum ...

We design Enclosed ground flares when waste gases are requested to be flared in an enclosed stack, with reduced flame visibility, minimal heat and noise, emissions sampling, ease, and smokeless combustion, in sensitive areas. The stack is internally refractory lined, designed for low and medium flows, has high destruction efficiencies relative to an open ...

AFG Combustion’s flare pilots are suitable for use on all types of Elevated Flare Tips, Ground flares and Burn Pits, in the worst weather conditions which may exist off-shore or on-shore, from sub-zero ambient conditions of Antarctica to the sand/wind storms of Middle East and Africa. ...

Any type of elevated flare can be applicable for offshore facilities. It considers the material of flare tip from high resistant of sour condition (corrosivity) and weather ...

Flare systems can be classified according to: Structural Support: Self Supporting, Guy Wired, Derrick Guy Wired, ...

Safety and reliability are crucial for offshore applications. ITAS offshore flares are robust, proven, long-lasting and safe. Designed to comply with the most stringent quality standards, ITAS offshore flares range from simple low-pressure utility flares to the sophisticated “swing-out” liquid burner systems. ...

Demountable flares are used when locating several flares in a limited available plot plan is critical, while limiting plant shut-down costs for maintenance. From design, engineering, fabrication, supervision and training, Fives offers up to 200 meters demountable flares systems. ...

The Ghost series of enclosed biogas flares is a simple and cost effective combustion solution for a variety of applications where a hidden flame is required. The superior design, high quality stainless steel construction and unmatched versatility make the Ghost Series Enclosed Flares an exceptional choice for emissions control within the biogas and wastewater ...

To dispose of heavy waste gases, which have a greater tendency to smoke, in a smokeless manner, we provide three different design options, depending on customer requirements. Air Assisted Flares, which utilize forced air from blower(s) to provide assist air for combustion and promotes additional air entrain from the ambient due to the relatively high exit speed of the streams. ...

An efficient Burner and proper design of Enclosure can produced an efficient Enclosed flare and that is what we have achieved. Heavy Hydrocarbon also can be burnt efficiently in such an Enclosed Flare without external Blower for Combustion Air. Enclosed Flares are installed inside plants where an open Flame may be a deterrent for people living ...

In normal landfill gas flares, for example, the usual minimum methane concentration at which a flare will burn is around 15 to 20% methane. Codes of practice, indeed, suggest that combustion should be halted when methane drops below 20% to avoid the possibility of an explosion. ...

Sonic Flare , Portable Flare ,Smokeless,low noise , low- Brightness Flares we supply . With Economic and Robust structures like Derrick,Guy-roped and Self supported . Designed specifically to suit local structural laws and emission laws. Clean Flare technology which we have achieved and refining it with our every installation.We ...

The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion gases at this temperature for an extended period of ...

We offer flares as open flares with an open flame or closed with a covered ...

Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...

It has lower investment cost and maintenance cost than other ...

A flare tip is used for the disposal of waste combustible gases and consists basically of a high grade alloy tube. Usually it is mounted on the top of a steel stack so that the heat of combustion and its products will not cause danger to life and property on the ...

The world’s most in-demand flare for the world’s most punishing conditions. Zeeco’s UF series utility flare is ideal for onshore or offshore applications that do not require smokeless performance or where smokeless flaring can be managed without air or steam assist. ...

Flare Systems with multiple risers allows for service/replacement on any flare burners, while other Flares operations remain uninterrupted. This means flare maintenance can be performed safely without shutting the flaring. Therefore NO shutdown on upstream operating facility due to shortcoming on one ...

Utility Flares are the simplest and most economical type of flaring systems that work well in applications that don't require smokeless burning or where smokeless burning is attained without assistance from air, steam or gas. Our highly engineered Elevated Utility flares are designed to withstand extreme conditions such as strong winds, high ...