Fuel Cell Component Equipment & Supplies

High process reliability, maximum flexibility and scalability have been the main pillars of DATRON technologies for many years and are the best prerequisites for fuel cell manufacturing. The DATRON fuel cell is composed of four components, which can be manufactured precisely and with high quality with DATRON ...

Modular system for end-of-line testing of battery systems including BMS controller. Test of cell behaviour and BMS functionality. Power supply, safety technology and components such as insulation monitors and measuring devices, voltage and current measuring components are housed and wired separately from the application module in the test ...

With test systems for Fuel Cell Control Units (FCCUs), developers can test the electronic components of fuel cell or battery systems without needing a real system. An essential component of the systems we develop for our customers is therefore cell voltage simulation (CVS). ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

Building on Clean Air Power’s global presence and long history as a provider of low carbon technology, dual fuel systems, gas components and recent hydrogen injector development, we have now partnered with a global supplier base, bringing together some of the best and innovative companies in the world to offer advice, support and a central sourcing option ...

The CVM solution CVM Ex is aimed at cell voltage monitoring in stationary applications. Important features are the explosion protection, which is realised by housing the measuring modules in an Atex-certified enclosure, as well as the modular design, which enables high scalability and individual customer ...

The G6S CVM solution was specially developed for cell voltage monitoring in series applications. It is scalable, allowing both single cell measurements and voltage measurements across two or four cells. The measurement modules are supplemented by a target market-specific head module, which is equipped with the data interfaces prevalent in the ...

Cell scanning: Double Cell DC (2C). Contact design: 0.5 mm spring wire with S-shape. Contact bearing: In PCB one side with redundant contact pin. Interlocking type: Friction lock in pinhole, additional hold-down possible. Contact pitch min.: 2.030 mm. ...

In addition to standard test signal cables, we also offer customised high-voltage wiring harnesses and adapter cables for your project. All wiring harnesses are manufactured in top automotive quality in our wiring harness factory in ...

The CVM G5S module was specially developed for cell voltage monitoring in series production vehicles. The performance features are limited to the range of functions actually required in series production. At the same time, the single-board solution offers high robustness in long-term operation and a production volume relative cost ...

In the further step to a highly integrated stack module, additional interfaces are provided for the integration of system components close to the ...

Sandwiched between two pieces of black carbon paper, the Nafion membrane forms the main reaction site. The MEA functions like a simple battery cell. Stacks of MEA are connected by the graphite bipolar plates. A fuel cell stack is a stack of MEA (cell) connected in series with graphite bipolar plates in between. MEA3 is fabricated ...

DuPont’s XL Membrane Electrode Assemblies (MEAs) are based on a new extended life reinforced membrane that combines the advantages of mechanical reinforcement with enhanced chemical stability, enabling improved membrane durability. The improvement is a result of an advanced stabilisation system that increases mechanical strength and provides resistance to peroxide attack, which leads to an ...

Motor speed (rpm):1000-24000, Pressure rise (kPa):15, Flow(Nm³/h):7, Rated power(kw):0.3, Dimensions(mm):105×100×170, Matching fuel cell ...

Dispersions (also called ionomers) are one of the critical components of fuel cell components. Catalyst layers require improved ionic conductivity for their optimal operation and hence, preparation of catalyst slurries with the correct dispersion materials will enable high performances. Dispersion (or ionomers) also act as ...

HEOS evaluation device is used for fuel cell system development and component BoP integration testing. The system specifications are 80 ~ 200kW, which can be integrated and matched with the environment chamber, and evaluate the development and integration of different systems BoP, DC/DC, FCU. ...

Aluminizing has proven to be a cost effective way to increasing the resistance of metals from corrosion and ...

Johnson Matthey Fuel Cells Ltd (JMFC) is a leading developer, manufacturer and supplier of fuel cell catalysts, membrane electrode assemblies (MEAs) and other catalysed components such as catalyst coated membranes (CCMs) to fuel cell developers worldwide. ...

Fuel cells react sensitively to salts, nitrous oxides or compounds with sulfur or ammonia, which can enter the process via the intake air. Effective filtration is therefore essential in order to protect the sensitive components and ensure greater safety. ...

The principal aim of VOLUMETRIQ, a commercialisation focused project, is to develop an EU-centric supply base for automotive PEM fuel cell stacks and their key components with volume manufacturing capability and embedded quality control at its ...