Fuel Cell Test Equipment & Supplies

Single-cell testing is a great tool for the research and development of materials for fuel cells. Well-defined and repeatable conditions of Leancat PBT enable benchmarking of fuel cells also thanks to extensive scripting ...

Research and development of solid oxide fuel cells poses specific requirements to the testing equipment, as it must operate at high temperatures. Leancat STS-10 satisfies all requirements of SOFC testing with the ability to preheat inlet gases and extensive scripting ...

Ideally suited for research and development of large-area single cells or verification of stack design on short-stack level. Well-defined and repeatable conditions of Leancat PTS-10 enable benchmarking of fuel cells also thanks to extensive scripting ...

The G20 is an economical complement to our PEM test product line with expanded capability in low power fuel cell characterization. The G20 has been designed for small active area, single cell R&D and R & D testing—with all the capability and sophistication of our larger test ...

Mini-Test Station for low current fuel cell testing. The Mini Test Station has no software and is designed to be used with the customers' Potentiostat as a load and all the data is recorded by that unit. The test station includes Analog mass flow controllers for Anode and Cathode gas streams, ...

The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...

With test systems for Fuel Cell Control Units (FCCUs), developers can test the electronic components of fuel cell or battery systems without needing a real system. An essential component of the systems we develop for our customers is therefore cell voltage simulation (CVS). ...

The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. ...

Our nickel ink is an excellent contact paste for SOFC testing, and is especially good for enhancing the electrical contact on the anode side of a cell during fuel cell testing. The nickel ink can also be used as a reference electrode, but any electrical testing with the nickel paste will require ...

The LSCF ink is made using our quality LSCF powder to provide an excellent cathode ink. It can be used to fabricate your own cells, and can be used to enhance contact of your solid oxide fuel cell to the test ...

The wide measurement range is well suited for high-voltage measurement applications such as power metering, power quality monitoring, motor test, battery stack testing, and fuel cell tests. You can perform transient and harmonic analysis with high-speed simultaneous sampling. In addition, you can prevent ground ...

During fuel cell system testing or development, an accurate, reliable and measurable supply of hydrogen is vital. With components resistant to hydrogen embrittlement, any delivery system must provide the fuel gas at the correct pressure and prevent emissions that could contaminate the stack catalyst. ...

Modular test systems for fuel cell technology: With test systems, made by KRATZER AUTOMATION you will gain the benefit of having a solution which will allow you to carry out multiple tasks in the field of proving and testing of fuel cell technology for vehicle ...

Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. ...

Regarding stationary fuel cells we are your industrialization partner for SOFC (Solid Oxid Fuel Cell) systems. We offer testing solutions for development and production of SOFC cell stacks. Our full stack and short stack test benches are designed for function ...

Stackable cell voltage monitoring (CVM) system designed for H2 fuel-cell stack research, testing and applications. CVM system can be used to prevent damage to individual cells, to monitor lifetime conditions, and to ensure optimal working conditions in applications. ...

HTS series are fuel cell membrane electrode (MEA) test and evaluation equipment. HTS station have temperature, humidity and pressure control systems, combined with fuel cell low voltage and high current power generation. It is used for MEA polarization curve analysis, endurance analysis, and pressure ...

The system can control the additive injection rate to maintain a preset level and has the ability to turn off the main pumps when either a high or low preset limit has been exceeded. The basic System consists of a Control, a Barrier, a Fuel Cell Module, a desktop PC and an optional injector pump is offered. Intrinsically safe approvals have been received from the ...

The multifunction Series 4000 is a range of fully automated, computerized test systems that provide the highest level of specifications and features available in the industry. From the base system that provides the highest level of accuracy and time resolution, features can be added to allow the Series 4000 test system to perform virtually any type of ...

Customization for integration into a test bench environment. Current and/or voltage ripple up to 15 kHz. 40 kHz high speed ...