Gas Cooling Equipment & Supplies

180A/60% ED, Euro central connection, pistol grip, M6*25/0.8 mm contact tip, 12 mm conical gas nozzle. The CastoPlus 156G is a gas-cooled MIG/MAG welding torch designed for demanding welding applications. With a power rating of 180A at 60% duty cycle and a Euro central connection, this torch offers high reliability and efficiency. ...

The water-saturated raw gas enters the piping system where it is cooled in a dryer. A separator then eliminates the liquid faction of the biogas, after which the gas is reheated through a blower and the pressure is boosted. ...

THE BOCK HG COMPRESSOR SERIES, SINGLE-STAGE & GAS-COOLED: The HG series is based on a classic, suction gas-cooled compressor technology according to the latest state of the art. Smooth running, service-friendliness, high performance and reliability are the distinguishing features of these modern compressors. ...

State-of-the-art Evaporative Gas Cooling and Conditioning Systems. Available Features: Downflow/upflow spray cooling tower design. Dual-fluid compressed air systems. Single-fluid mechanical atomization systems. Hybrid low-pressure assisted single fluid ...

We’re focused on Gen-IV High-Temperature Gas-cooled Reactors (HTGR) as the technology of choice, with advantages in sustainability, economics, reliability and ...

An example for the Direct-reduction process systems is the Hlsarna process, which was developed as part of the ULCOS project (Ultra-Low Carbon Dioxide [CO2] Steelmaking). This has the goal of halving the carbon dioxide emissions in steel production. Oschatz built waste gas cooling sections in connection with the HIsmelt process for the first time in 2005; these ...

Amerair has a complete line of direct contact heat exchangers that are designed to recover heat from process waste gases and transfer this valuable heat to process slurries or plant water heating systems. Amerair’s direct contact heat exchangers can be applied to hot process emission controls systems utilizing any type of particulate control device. Process water or slurries, having solids ...

It is used for vacuum oil quenching of materials like alloy steel, bearing steel, spring steel, die steel, high-speed steel etc. also for annealing and gas cooling foe the above ...

t is used for vacuum oil quenching of materials like alloy steel, high speed steel, super high strength steel, M300 steel and etc. It is specially suitable for vacuum heat treatment of long rod type parts, plate type parts, long axle parts, landing gears and similar large size parts. The jobs treated by the furnace have little deformation and good ...

Stand By Power [ESP] (Liquid Propane): 10000 VA. Stand By Power [ESP] (Natural Gas): 10000 VA. Frequency: 50 Hz. Voltage: 230 V. Phase: ...

Air-cooled gas coolers to remove excess heat from a gas stream. Excess heat from a gas stream is lost to the atmosphere while the gas product is cooled close to ambient temperatures. Air-cooled gas coolers are used to remove this excess heat. ...

Stand By Power [ESP] (Liquid Propane): 13000 VA. Stand By Power [ESP] (Natural Gas): 13000 VA. Frequency: 50 Hz. Voltage: 230 V. Phase: ...

Special heat exchangers are used to cool and dehumidify gases simultaneously. When used to extract mine gas, for example, these heat exchangers offer significant advantages. Decreasing the quantity of water also reduces corrosion and drops in pressure. Herco gas coolers have classic, smooth copper tube heat exchangers. ...

Fog cooling system basically consists of fog nozzles installed on stainless steel arrays typically placed across the section of the gas turbine inlet air ducting before or after the air filter; high-pressure stainless steel head pumps supply water from 1000 to 3000 psi (70-200 bar); pre-filter unit at pump water inlet to block big particles (bigger than 1 micron) ...

Biogas, sewage gas and land fill gas contains not only water vapour, but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage of the ...

Oschatz designs, produces and installs complete converter waste gas cooling systems for waste gases from top and bottom blowing converters converting the generated process heat into steam. At Oschatz waste gas cooling plants with evaporation cooling, exhaust gases are cooled from approx. 1700 ...

Heat Exchangers are supplied as pre-assembled units for easy and fast installation. The reliable and proven gas cooling technology allows use of recovered heat for drying, combustion ...

If natural gas is cooled at minus -162°C, it becomes liquid and more compact, occupying just 1/600th of its gaseous volume. This enables to transport high amount of natural gas at low ...

Max Pression: 0,8 BAR. Max Flow: 914 m3/h. Type: low pressure. Coupling: Compr.gland. Max Height: 8 mca. RPM: 1600 RPM. Gas: Diesel. Cooled: Aceite radiador. Finish: M.Baseframe. ...

Our shell and tube heat exchangers are widely used for liquid to liquid and liquid to gas applications such as oil cooling, condensing, jacket water or gas cooling. Our clients are mainly from the resources, marine and industrial ...