Gas Engine Equipment & Supplies In Oregon

The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...

The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and ...

Gas engine TCG 2032 - Facts and Figures,Output range from 3,000 to 4,300 kwe ‒ MWM's largest series,Mainly used in large IPP projects with up to 100,000 kwe,Outstanding reliability and low maintenance costs, More than 400 power generators with approximately 1,400,000 kwe already installed around the globe ...

The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. ...

Breaking New Ground in High Horsepower Applications; For more than 100 years, Waukesha Engine has been committed to evolving engine technologies. Waukesha’s newest generation of the 275GL+ with ESM2 gas engine provides optimum performance in gas compression and other mechanical drive applications. Combining ...

The ENERGIN M series Gas engines form the base for a range of efficient power generation products. Depending on your projects requirement you can choose the best fit from our wide range of generator sets with and without heat recovery and cogenerators. The engines are designed and manufactured by R Schmitt Enertec in Mendig, ...

Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...

For more than three decades, Waukesha Engine’s VGF series has delivered consistent critical power from a proven and reliable platform. Ideally suited for a variety of mobile and stationary applications, VGF high-horsepower engines feature smart controls and fuel flexibility. ...

The gas engineuses the energy content of the gas to generate electricity. Biogas may need cleaning before it is fed to the engine. As a rule of thumb, one-third of the biogas is turned into electricity and two-thirds is turned into heat. The generation efficiency of gas engines run on biogas is around 38-40 per ...

Robust and reliable, the rich burn, electronically carbureted SR Series gas engines offer great performance for power generation and cogeneration ...

Based on the proven design concepts of Type-3 and Type-6, the modern Type-4 engines in the 800-1,500kWe power range are characterised by a high power density and outstanding efficiency. The optimised control and monitoring provides easy preventative maintenance and maximum reliability and ...

Lean burn and electronically carbureted the SM series of gas engines provide an excellent solution for power generation, cogeneration and trigeneration ...

The result of continuous enhancements and extensive experience, INNIO's Jenbacher Type 6 gas engines are an advanced and reliable addition to our product line. The 1,500-rpm engine speed results in a high power density with low installation costs, and its pre-combustion chamber achieves high efficiency with low emissions. 6,100 ...

Jenbacher Type 3 proven - reliable - flexible ~11,000 Type 3 engines were delivered since ...

Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its ...

Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. ...

Some of the longest running engines in the field, Waukesha’s VHP engines are designed and built with knowledge from a century of oil and gas and power generation industry experience. Now, the VHP Series Five provides even more power and performance for your most challenging and remote ...

As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power ...

The Waukesha mobileFLEX gas engine and genset portfolio with EPA Mobile Certification is the latest advancement to deliver lower-cost, lower-emission power to drill rigs, artificial lift enhanced oil recovery and oilfield equipment. An all-gas alternative to diesel units, mobileFLEX is an EPA mobile-certified solution that provides a cost ...