Gas Engine Equipment & Supplies Near Cameroon
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
These crops are typically ensilaged and stored in clamps or hoppers and are continuously fed into the digester throughout the year. In India biogas plants may be called gober gas ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Carbon Capture, Utilisation & Storage (CCUS) is the process of capturing CO2 from energy intensive processes before it enters atmosphere and finding a market use or transport to a storage facility (normally underground in geological caverns). Long-term storage of CO2 in a geological formation is still relatively new as a concept but will play a huge part in the net-zero efforts in the future. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Fuel gas boosters or blowers are used to raise the pressure of fuel gas to the operating level of the gas engine or combined heat and power plant. Gas boosters are often required for biological gas applications where the pressure level of the biogas holder is below ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The Waukesha Series Four rich-burn engines are the engines of choice for the harshest and most demanding gas compression, power generation and mechanical drive applications. The engines can reliably produce more power on hot field gases, at high altitudes, and in remote locations, all while delivering low emissions when paired ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for commercial applications. Cogeneration systems are successfully applied in a range of different applications including office buildings, airports and retail ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you