Gas Engine Equipment & Supplies Near South Africa

Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government ...

These crops are typically ensilaged and stored in clamps or hoppers and are continuously fed into the digester throughout the year. In India biogas plants may be called gober gas ...

However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...

Proactive® 12 Volt DC Output Crusader® Gas Generator Was Specifically Engineered to Provide Proactive® 12 Volt Pumps Consistent 50 Amp and 12.5 Volts Output for a Consistent and Uninterrupted Pump Flow Rate, and Long Pump Run Time! Weatherproof and rugged 12 Volt Crusader® 50 Amp Portable Gas Generator is ideal for remote sites, ...

Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...

The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. ...

Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only ...

Carbon Capture, Utilisation & Storage (CCUS) is the process of capturing CO2 from energy intensive processes before it enters atmosphere and finding a market use or transport to a storage facility (normally underground in geological caverns). Long-term storage of CO2 in a geological formation is still relatively new as a concept but will play a huge part in the net-zero efforts in the future. ...

Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...

Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. ...

A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents ...

Through on-going investment in research and development GE's gas engines remain market leaders in the gas engine field. The engines are highly efficient at the conversion of the energy within gas into useful electrical power. In the event that there is a local use for heat, the alternative ...

A captive power plant is a facility that is dedicated to providing a localised source of power to an energy user. These are typically industrial facilities or large offices. The plants may operate in grid parallel mode with the ability to export surplus power to the local electricity distribution network. Alternatively they may have the ability to operate in island mode; i.e. independently of the ...

Abandoned mine methane provides a good source of medium to high quality methane. Mine gas from abandoned mines typically contains no oxygen, and its composition changes very slowly. The methane content can range from ...

Gas engines utilising syngas as a fuel can be configured in a combined heat and powerconfiguration in order to maximise the efficiency of the ...

For power users where security of supply is an important factor for their selection of power production equipment and gas is abundant, gas-based cogeneration systems are ideally suited as captive power plants (i.e. power plants located at site of ...

Furnace gas is a gas which is produced in different types of furnace during the production of metals. High levels of power requirement and rising energy costs present a major challenge to the metallurgical industry. Some furnace gases created as a ‘free’ by-product during production processes serve as an attractive fuel for power generation. ...

Quadgeneration takes this process one step further with the addition of systems to purify carbon dioxide from the engine exhaust. Combined cooling and power (CCP) is where electricity and cooling are utilised alone. ...

Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling ...

Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...