Gas Fire Equipment Supplied In Europe

Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered to the site prewired and prepiped requiring only steam, gas, main power and stack connections. Similar units are available to heat air or other ...

Ignition of main burners in furnaces, boilers, incinerators and power ...

A popular semi muffle gas fired kiln for both the professional and student user. The LN1000 provides controlled heat up to a maximum temperature in excess of 1000°C. The constant heat input combined with space-age insulation produces a stable operating temperature with minimum gas usage. ...

299,000 BTU (Minimum) Plus ...

Ignition of main burners in furnaces, boilers, power plants and ...

Interest in gas-fired technology is in part based on its high-potential efficiency, which has risen from 52% to close to 60% over the last 20 years. Another asset is the ability to switch from base load to cycling in order to support electrical ...

Ignition of main burners in furnaces, boilers, power plants and ...

The main reaction furnace is where the thermal stage of the modified Claus process takes place. In this thermal stage the majority of the sulphur recovered in the sulphur recovery unit is formed. Also impurities such as ammonia and aromatic hydrocarbons are destroyed here. The burner, naturally plays a crucial role in this through the degree of mixing achieved in the furnace as well as ...

Foundry Projects Ltd offer a system to pass scrap through a refractory lined gas fired flame tunnel. The base of the tunnel comprises of a vibratory feeder to provide the conveying motion and the top of the tunnel is a separate static hood independent of the feeder which incorporates high velocity gas flame burners pointing vertically downward ...

When we consider fuel gas fired combustion equipment in the sulphur recovery unit, we can distinguish between the substoichiometric in-line re-heaters and reducing gas generators and the superstoichiometric incinerator. Some design considerations remain the same for every piece of fuel gas fired process ...

The Peerless-Aarding non-metallic Expansion Joints for Gas-Fired Power provide superior corrosion resistance, vibration reduction, and lower installation ...

The units would be complete with valve trains, quench air fan and control system as necessary. Units can be liquid or gas fired as required. Heat release rates are normally limited to between 1MW to 5MW ...

The new Dorchester DR-FC Evo range of condensing water heaters from Hamworthy replaces the DR-FC range and brings with it even higher outputs, significant performance improvements and seasonal efficiencies up to 107% nett for commercial water heating applications. The DR-FC Evo range consists of 7 models with continuous outputs from 596 to 2333 litres/hour, based on a 44°C temperature rise ...

Anka Series thermal oil boilers has 100.000 Kcal / h – 6.000.000 Kcal / h Heat Capacity. Our company is EKOTEK, Trademark registered and controlled and audited by ISO 9001: 2015 quality management ...

The HEAT-RAD range of gas fired tubular radiant heating systems were designed and introduced into the market place by Horizon during 1983. The range of units available can be arranged in different configurations, namely U-tube style, straight tube style, semi-integrated or fully-integrated systems totally flued to ...

The DUO-GAS system is a 316L stainless steel concentric flue designed for gas-fired room-sealed appliances. It brings the combustion air in and also evacuates the smoke. It can also be used as a conventional gas vent. Duo-Gas is mainly suitable for the new build market and can terminate vertically through the ...

Remeha Gas 110 Eco boilers are floor standing gas-fired condensing boilers fitted with an “Open Therm” control interface which enables direct weather compensation using Remeha single and multi boilers controls or the customer can choose to use external control options supplied by others without affecting boiler performance. ...

Oil or gas fired horizontal thermal oil heaters. In Akkaya KYK-H thermal oil heaters, the total length of the tubes and the pressure losses are calculated carefully and the heaters are designed in this ...

The Dorchester DR-RS range is designed to operate as a room sealed system, making it particularly suited to applications where a conventional flue is impractical, or where the heater is be located closer to point of use. Units are available with either vertical or horizontal flue arrangements using twin duct or concentric flue systems. Consisting of 5 models with continuous outputs from 517 to ...

We design and supply oil and gas fired boiler plants as turn-key projects for renovating existing systems or for reserve to biomass boilers peak load. Our scope of supply includes known trademarks boilers (shell type, water tube) and burners for heavy, light oil and gas fuels. ...