Gas Turbine Equipment Supplied In South Carolina

Aluminizing has proven to be a cost effective way of increasing the resistance of metals to oxidation and corrosion at high temperature. Although for some markets it is a mature technology, new application methods and new formulations continuously extend its application field. Ni, Co, Fe, Ti base alloys can successfully be treated with modern aluminizing ...

Aluminizing has proven to be a cost effective way of increasing the resistance of metals to oxidation and corrosion at high temperature. Although for some markets it is a mature technology, new application methods and new formulations continuously extend its application field. Ni, Co, Fe, Ti base alloys can successfully be treated with modern aluminizing ...

Flame Spray has developed a specific process, Alloy H 900 series, for metallic coatings through high-pressure combustion equipment (HP/HVOF). A peculiarity of the Alloy H 900 series processes consists in the possibility to obtain very dense coatings with excellent bond strength, better oxidation and corrosion resistance than those produced with traditional detonation ...

The Spraylast 287 series includes various types of Yttria Partially Stabilized Zirconia (YPSZ) coatings, all characterized by a very low thermal conductivity. Spraylast™ 287 coatings are the perfect solution where high Thermal loads have to be faced. Gas turbines and other large industrial equipment with high thermal efficiencies contain components or parts ...

Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity through adiabatic cooling of the gas turbine inlet air by the spraying of atomized water in the axial compressors. Nevertheless the water injection can cause droplet erosion phenomena on the first stages of blades of the ...

The corrosion may cause a uniform destruction or localized destruction (pitting, stress corrosion cracking) of the metal surface. The gas turbine's axial compressors operate in aggressive environmental conditions where low temperature corrosion phenomena, like wet corrosion, are very frequent. Aluminum based slurry coatings are widely used and approved for ...

The SGT-100 gas turbine is an industrial gas turbine in the power output range from 5 to 6 megawatts (MW) which combines compact and rugged construction with advanced technology. For industrial power generation a single-shaft version of the SGT-100 is used which has a power output of 5.05 MW(e) or 5.1 MW(e). ...

Typical applications are: - Droplet erosion protection in steam turbine LP blades - Corrosion protection for boiler components (thermocouples, etc.) - dimensional restoration of gas turbine ...

Aluminizing has proven to be a cost effective way to increasing the resistance of metals from corrosion and ...

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. ...

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...