Gas Turbine Engine Equipment & Supplies In Iran

The TF series marine gas turbines by Vericor Power Systems are a result of decades of engineering experience and technical innovation, rooted in the legacy of the Lycoming Engine Company. These turbines are designed for cantilever mounting off the reduction gear, optimizing both weight and efficiency. ...

The dehydration volume is large and the water can be drained off on line. TY series can effectively extend oil lifetime and protect turbine and lubrication system from damage. Online running, Reliable and steady in operation, which is undoubtedly the ideal oil treatment solution for the ...

The bottom line of this purification process is to enhance the performance level of transformers, circuit breakers, mutual inductors, cables, and capacitors. All these equipment and machinery use an insulating system. After treatment Moisture PPM ≤3 Gas content % ≤0.01 Impurity size μ ≤1 (no free carbon) Breakdown voltage kV ≥75 IFT dynes/cm ≥40 Acid value mgKOH/g ≤0.03 ...

TY-P can rapidly and effectively remove the water, gas and impurities, aim at turbine oil's nature of high water content, easy emulsifiable and high impurity content, and make the oil recover the new oil's ...

The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...

The Continental Controls Corporation AGV pilot valve is a critical component of gas turbine engine control systems. It is a compact, lightweight, and easy-to-install device that helps to improve engine performance and reliability. The AGV pilot valve is responsible for controlling the flow of fuel and air in the ...

Continental Controls Corporation’s designed the FT50 pre-assembled with 2″ valves for hassle free installation. The FT50 is applicable with various engines and fuels such as natural gas and propane, etc. The fail safe rapid shutdown response stops gaseous fuel flowing through in less than 200 milliseconds. Its operation relies on a spring-loaded piston within ...

Continental Controls Corporation’s FT10 comes pre-assembled with 1 ½” valves, ensuring convenient installation. The FT10 is compatible with various fuels, including natural gas, propane, and more. The Fuel Train isolation valve provides shutdown on a gas turbine by rapidly halting gaseous fuel flow. The valve utilizes the supply pressure to move ...

It is a crucial component in ensuring the safe and efficient operation of engines, as it helps to prevent engine damage, optimize fuel efficiency, and reduce ...

The AGV50 is a compact and efficient air-fuel ratio controller for industrial gas engines from 5,000 bhp to 38,750 bhp. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV50 is ...

The AGV10 is a compact and efficient air-fuel ratio controller for industrial gas engines. It offers advanced electronic control to adjust the fuel flow and air-fuel ratio based on engine load and gas quality, resulting in better engine efficiency and reduced emissions. The AGV10 is easy to install and ...

Gas Turbine or Gas Engine CCHP which suits to your plant’s Cooling / Heat / Power requirement. Digitalization solution which include Economic Dispatch, Energy Efficiency Optimization and Predictive Maintenance. ...

Gaumer Process provides standard fuel gas conditioning systems (in accordance with Gaumer standard specifications) and custom engineered (in accordance with customer specifications) to meet the desired requirements of gas turbines, engines, burners and compressors of different makes. ...

The TF40F is an industrial gas turbine meticulously engineered by Vericor Power Systems, catering primarily to the oil and gas sector. This turbine is designed to deliver high power density, making it suitable for robust industrial applications where efficiency and reliability are paramount. ...

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the ...

Pressure reduction stations are required to regulate the high incoming pipeline pressure to meet the desired equipment pressure. Plants utilize equipment such as gas compressors, engines, turbines, burners, etc. have a demand of a specific operating pressure range set by the equipment manufacturer. Gaumer Process provides standard (in accordance ...

Biogas is produced during the anaerobic degradation of organic material and this biogas can be used to generate heat. The generated heat can be used for various applications like boilers, gas engines, micro turbines, fuel cells, and more. We can assist you with a biogas plant to generate heat for your industrial or commercial ...

Waste heat boilers are often used to raise steam or hot water by utilising the heat from hot gases exhausted by high energy equipment such as gas engines, turbines, incinerators and regenerating furnaces. A waste heat boiler economiser can be retrofitted onto the exhaust ductwork of the boiler to further cool down exhaust gases and so preheat the ...

Plants with heat and electricity generation are called Cogeneration plants, and plants with cooling in addition to heat and electricity generation are called Trigeneration plants. The heat source is usually Turbine and Gas Engine, but can also be waste heat recovery unit and generators. They are preferred due to their high total system efficiency ...

HAYNES® 25 alloy (UNS R30605) offers excellent strength, good oxidation resistance to 1800°F (980°C), and relatively good resistance to wear and galling. Used in gas turbine ...