Gas Turbine System Equipment & Supplies

Concord Environmental has in-depth experience in the design, supply and optimization of SCR systems for both combined cycle (CC) and simple cycle (SC) power generation assets. Concord’s engineering and technology background provides the customer with a unique skillset because of its experience with all major HRSG, gas turbine, and SCR ...

A gas turbine bypass system diverts flue gases from the Heat Recovery Steam Generator (HRSG) in combined cycle mode to a bypass stack with a silencer assembly to operate in simple cycle mode. Maintenance can then be performed on the HRSG as the diverter isolates it completely from the gas ...

A tailor-made and optimal isolation of gas turbines can significantly reduce energy consumption and simultaneously increase turbine ...

During these last 30 years, SAI has equipped over 600 power plants worldwide with complete ventilation system with airflow that are often exceeding 1 000 000 ...

Consolidated Fabricators (ConFab) specializes in the engineering and manufacture of complex systems to support power generation, especially gas turbines. Both OEMs and their customers come to us to help produce complicated systems that incorporate mechanical, electrical and fluid control disciplines. With over 25 years of ...

To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine ...

The Innova anti-icing system prevents frost and ice formation on inlet components to protect the gas turbine, and prevent pressure drop buildup. Icing can damage blades, filter elements and other vital parts even in temperatures above freezing—ice crystals form at less than 40⁰F and greater than 50% relative ...

The system uses a proven aero-derivative gas turbine that gives over 40 million hours of operation and is specifically modified for alternative fuel operation. ...

Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where steam is ...

Dürr Universal’s qualified team of engineers provides all components for a complete gas turbine inlet and/or gas turbine exhaust system, including noise abatement baffles, exhaust liners, diffusers, insulated ducting, oxidation catalysts, exhaust stacks and support steel (including platforms, ladders, supports ...

Each Peerless-Aarding brand Gas Turbine Single Cycle Exhaust System design is constructed for internal stud spacing, stud size, and liner plate thickness, to ensure the best operational conditions and unit lifetime. Our extensive experience and lab and field measurements allow us to deliver premium quality cycle exhaust systems ...

The gas turbine exhaust Diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree ...

Results show that our Anti-icing systems have a larger power output for gas turbine peak-performance compared to hot water heat ...

The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. ...

Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support ...

Additionally, our manufacturing techniques ensure system cleanliness, allowing trouble-free operation of this critical gas turbine component. ...

LM6000 is a simple-cycle, 2-shaft, high performance gas turbine derived from the core of GE’s reliable air craft engine, CF6-80C2. CF6-80C2 has logged more than 76,500,000 operational flight hours, a 99.97% dispatch reliability, and commercial aviation’s lowest shop visit ...

For example, the user may change the physical hardware of a heat exchanger within a HRSG, to make it match the specs provided by the HRSG’s vendor. As another example, the user may adjust a steam turbine nozzle area at the inlet to any group of stages, to match the pressure-flow characteristics supplied by the steam turbine vendor. As yet another example, ...

GT PRO® automates the process of creating a combined cycle or gas turbine cogeneration plant design, guiding the user to rapidly and easily attain an optimal configuration and technical parameters. The user inputs design criteria, starting with the big picture and progressing in a logical sequence into greater details. ...

PDETM (Plant Design Expert) is an intelligent shell that uses the GT PRO/GT MASTER design and simulation engines. PDE is a compact expert program, with built-in logic to create and configure suitable gas turbine power and cogeneration plants based on the user’s electricity and heat demands, site parameters, and constraints. It rapidly creates side-by-side ...