Heat Exchanger Equipment & Supplies Near Turkmenistan

Superheated steam is not always desirable,for instance in those applications that heat transfer coefficient is important, saturated steam is preferred. Desuperheaters can reduce the temperature of steam or any other superheated vapor near to its saturated temperature by means of water or another coolant. Water is introduced into the process line and comes into direct contact with ...

Thermal and mechanical design of MPI-KMC air coolers are according to latest version of international standard API-661 and MPI-KMC is a well experienced company in fabrication, test and installation of air cooled heat exchangers. ...

Our Shell & Tube Heat Exchangers can be designed and manufactured in all TEMA configurations, from single pass to multi-pass, “U” tube configurations and with or without removable bundles. Designs meets all the requirements of shell and Tube Heat Exchangers as well as specialty units for thermal expansion, ...

With the special design of the PDS type furnaces, it is possible to do both, debinding and sintering in one furnace. For debinding, a special gas guiding configuration and molybdenum retort are utilized to protect the heating elements from all gaseous by-products. The heating elements and radiation shields are also constructed of molybdenum. The system is ...

More than 1000 KAHL belt units are in operation worldwide and work in different sectors. Before you decide on a belt drier, you have the opportunity to perform a belt drier simulation for your project in our pilot ...

Marley Air Cooled Heat Exchangers stand up to the demanding requirements for heat transfer processes in chemical, oil and gas, process and power generation ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...

Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are ...

With the huge growth we are seeing in this sector, desert farming is here to stay. It brings with it the same challenges as traditional farming, but with more emphasis on remote locations and the logistics involved. Inciner8's range of purpose built farm incinerators are well suited to this challenging environment. All these machines are DEFRA type approved and handle a wide range of agricultural ...

Heating and district heating controllers; MISSION; building automation, APPLICATION; meter reading. heating control. Drinking water preparation. district heating. district heating. cold control. Thermal solar systems. temperature ...

Ayvaz SK-51 float steam traps especially perform continual evacuation at the steam saturation temperature. Ayvaz SK-51 doesn’t affect instantaneous and large pressure shift. SK-51 is mainly applied at the systems where the condensate is evacuated rapidly and it is also ideal for automatic temperature control system. Air and condensate evacuate is carried out by thermostatic capsule. So ...

After H2S removal the gas is fully saturated with water; the relative humidity (RH) is 100%. If water droplets should reach the cylinder heads and combustion chambers the water will destroy the oil film. This will lead to increased wear of moving parts as well as substantial reduction of the lifetime of the engine oil. Therefore, it is necessary to dry the gas to avoid condensation in the pipe ...

Our customer-oriented, individual solutions in the area of shell-and-tube heat exchangers find their main application in project business. The focus throughout is always on the customer’s requirements for our products. We look at the operating data, construction regulations and specifications in the course of project engineering and use this information ...

Originally developed specifically for applications such as cooling hydraulic and motor oil, TPL brazed plate heat exchangers are also ideally suited and deployable for other application processes in mechanical and plant engineering. TPL satisfy the high demands in this area with regard to reliability and thermodynamic efficiency – and can be designed with ...

Many possible applications, including special applications in chemical facilities or laboratories where highly corrosive media such as heat-transfer oil are processed. Used in building services as system separation in cycles such as district heating, solar technology and heat pumps, as well as in floor heating and service water ...

Mainly used in heating, air conditioning, motor cooling and heat recovery. Can be used universally with different ...

The range of safety shell-and-tube heat exchangers is based on the “three chamber devices” principle, which was developed andpatented by the company’s founder Karl-Heinz ...

Our universal shell and heat exchanger in a modular system construction is used mainly to cool liquids such as lubricating oil and hydraulic oil or water, as well as for heating by means of saturated steam. Water, water/glycol mixtures or seawater can be used as coolants. ...

Gasketed plate heat exchangers consist of a set of adjoining embossed plates with apertures. The plates are assembled at a 180° angle to each other, resulting in a flow gap. The gasket, which is mechanically secured or glued onto every plate, ensures that the flow gaps are securely sealed to the outside and from the second medium involved in the ...

The Thermo-T tubular heat-exchanger is designed to recover heat from energy-consuming processes up to 2000°F. Energy can be recovered and returned as process make-up air, used to preheat combustion air, or used for plant or office heating. Thermo-T offers fully adjustable tube-size and tube-spacing as well as both single-pass ...