Heat Recovery Unit Equipment & Supplies

Klimak offers custom Air Handling Units with a wide range of energy recovery options in multiple configurations incorporating the following standard features for each unit : enthalpy wheels, sensible heat wheels, enthalpy plate exchangers, sensible plate heat exchangers, heat ...

Heat recovery units are preferred for energy saving at locations where need for fresh air flow is high. The unit improves the quality of ambient air as ...

Heat recovery units RCU provide the necessary ventilation and recover a high percentage of energy, present in the exhaust air. The heat gained from recycled air is transferred by means of an exchanger to outer, colder air that gets pre-heated, thereby reducing the thermal shock as compared with inside ...

TIGK heat recovery devices are used in offices, houses, hotels, show centers to provide fresh air and exhaust dirty air. The energy of the exhaust air is transferred to fresh air by means of aluminum plate type heat recovery heat exchanger and energy economy is achieved. ...

Heat recovery units RCU-HE provide the necessary ventilation and recover a high percentage of energy, present in the exhaust air. The heat gained from recycled air is transferred by means of a hygroscopic rotary recuperative heaters to outer, colder air that gets pre-heated, thereby reducing the thermal shock as ...

Compliant with ErP 2018 NRVU. Very high efficiency heat recovery Eurovent Certificate. Multi-speed or Brushless EC fans. F7 and M5 high efficiency filters. Double sandwich wall with high insulation capacity. Full control ...

BAX is a condensing heat recovery unit built from AISI 316 Ti stainless steel that must be located after the flue gas exit output of boilers running only on natural gas or LPG. The flue gases passing through the recovery unit undergo a considerable reduction in temperature, and, if the system return temperature ...

Bulk Milk Coolers (BMC) are used for chilling the milk at the milk collection centers. After completing the chilling cycle, it is essential to clean the BMC and other milk equipments with hot ...

The high-temperature heat recovery units in the Safe Series from exodraft recover unused energy from flue gases and process air. The units are designed to operate in flue gas temperatures up to 400 °C on air side. The housing of the Safe Series units consists of stainless steel 1.4404 (internal)and 1.4301 ...

The exhaust gas heat recovery unit uses simple vertical flue tubes. Individual exhaust gas heat recovery units are installed on each G / E, and the exhaust from the flues of the G / E passes through the series of smoke tube in the unit where heat exchange takes ...

Rinheat has supplied more than 80 heat transfer units for TMP and CTMP plants all over the world. Rinheat TMP heat recovery system is designed to recover the heat from the dirty steam generated in thermo-mechanical pulping. The construction is all stainless steel and there is a built-in droplet separator. ...

Waste Heat Recovery Units (WHRU) for Oil and Gas sector have been manufactured at CF Struthers for the past 25 years. Casing fabrication plus internal lining systems and dampers all manufactured to high standards. Generally carbon steel casings and carbon/alloy tube bundles. ...

The Rosenberg Suprabox Comfort heat recovery units are characterized by their reduced space and are distinguished by their high energy efficiency. These equipment provide real energy savings in the ventilation system of restaurants, retail stores, hotels, office buildings and any similar application. ...

The Waste Heat Recovery Unit (WHRU) range of NEM offers an efficient recovery method of thermal energy from gas turbine exhaust gases, but can also recover waste heat from other heat ...

The high-temperature heat recovery units in the Basic Series from exodraft recover unused energy from flue gases and process air. The units are designed to operate in flue gas temperatures up to 600 °C on air ...

EVENT Series Residential Type Heat Recovery Units are used in homes and small volume areas to provide fresh air and to exhaust polluted ...

CF Struthers first developed the finned tube helical coiling technology in 2001, we have continued to improve and perfect the manufacturing process, which has enabled the circular waste heat recovery unit to be marketed worldwide. The coils are constructed from ‘finned’ extended surface tubing and can be formed in excess of 6m in ...

Clyde Bergemann Australia is a leading supplier of WHRU’s in the floating production market around the world. It has built a reputation as experienced thermal engineers in the field of heat recovery. Steel ‘H’ and Double ‘H’ heat recovery surface has formed the basis of our offshore WHRU designs. ...

Ceiling Type Heat Recovery Device with DX Coil is designed to meet the exhaustand fresh air needs in indoor spaces and thanks to its special plate heat exchangerand with the help of the built-in fans, it provides energy saving by recovering the heatenergy without mixing the exhaust air with fresh air. ...

Clyde Bergemann Australia, a leading supplier of WHRU’s in the floating production market around the world, has built a reputation as experienced thermal engineers in the field of heat recovery. Steel ‘H’® and Double ‘H’® heat recovery surface has formed the basis of our onshore WHRU ...