Ignition System Equipment & Supplies

The True-Lite Igniter is an automated igniter system intended to be used in applications where the operator needs to maintain a continuous pilot light. This superior technological advance utilizes a Programmable Logic Controller (PLC) to monitor a constant pilot light. ...

Low loss of pressure through optimisation. Immediate, repeatable ignition in every firing rate. Highest flame stability. Safe flame monitoring. Modular design. SIL 3 certified. Intermittent or continuous operation.Protection class up to IP 67. Thermal power up to 3,000 kW. Flame length up to 2,500 mm. Pilot burner length up to 6 m. ...

Ignition of all kind of flares in the (petro) chemical, oil and gas, steel and biogas ...

GBA offer a full range of ignition equipment to suit all requirements. We offer the well tried and tested Flame Front Generator (FFG) in both forced draft (uses compressed air) and natural draft (inspirates it's own air) versions but increasingly we find that our modern state of the art CHT High Energy direct electric ignitors are finding favour with clients who want a simple to ...

Safe-Fire’s MB-3 oil igniter is specially designed for boilers burning higher ash content coal or operating in harsh environments.MB-3 Igniter resists erosion from the harsh secondary air and delivers smooth and trouble free ignition for large coal-fired boilers, particularly tangential firing types. ...

The MAXFire® 100 Series gas igniter incorporates the “protected primary combustion zone” design in each of the 5 capacities available. The ignition process starts inside the guide tube away from the burner environment resulting in an extremely stable and reliable igniter. ...

Electronic Ignition Systems utilise High Voltage Direct Ignition (HVDI) or High Energy Direct Ignition (HEDI) systems that are highly efficient, reliable and rugged. In HVDI systems, a high voltage spark is utilised to ignite hydrocarbon gases. In HEDI systems, a ...

The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. ...

The Tornado Electric Ignition System (TEIS) is a cost-effective alternative to the pilot monitoring system that can be used for sweet gas applications where fuel gas or propane supply is not ...

One of our most popular Ignition systems for Flare and Gas only fuel applications – Optimized 2 spark-per-second (SPS) performance for exceptionally long ...

Optimized 5 spark-per-second (SPS) performance for Gas, Light Oil, Diesel and Bio-diesel applications. The BD-5 System is particularly well-suited blackstart and remote-area ...

Our biggest seller – Optimized 4 spark-per-second (SPS) performance for Gas, Light Oil, Diesel and Bio-diesel ...

Reliable ignition that automatically monitors tip wear so you can replace the igniter tip before an ignition fault ...

AFG Combustion’s flare pilots are suitable for use on all types of Elevated Flare Tips, Ground flares and Burn Pits, in the worst weather conditions which may exist off-shore or on-shore, from sub-zero ambient conditions of Antarctica to the sand/wind storms of Middle East and Africa. The pilots have very wide application ranging from standard LPG or natural gas to low BTU gases like bio ...

The NGI-5000 Logic Module also offers a future-proof upgrade path for complete NGI-5000 system installations, empowering a modern, reliable solution for engine ignition ...

The Igniter control system has been designed to offer maximum reliability and flexibility. The Igniter uses only on low tension cable to transmit the spark and also to receive the flame on signal, giving maximum with less congestion of the ...

Designed by FlareTech Inc., the Electronic Spark Ignition System (ESI) is tailored for emergency relief applications involving waste gas streams that are readily ignited. This system uses a continuous, intermittent arcing cycle, factory set for a 1-second arc every 10 seconds, to directly ignite waste gas ...

The NGI-5000 ignition system is designed for large bore gas engines, providing an advanced solution for precise ignition control. It features dual 7-inch, full HD displays that are sunlight-readable with a brightness of 900 nits, ensuring visibility under all lighting conditions. ...

Based on the MIC4 series, MOTORTECH produces a special controller version as a replacement for the TEM-ZS1 and TEM-ZS3 ignition system used on MWM/DEUTZ gas engines. Designed as an exchange device, the MIC4-ZS enables a quick conversion without great effort. With its future oriented electronical concept, the MIC4-ZS convinces with improved engine starting ...

This system is designed to allow fuel gas to a pilot, ignite the pilot with use of proprietary spark igniter, and monitor using one of following technologies: Thermocouple, flame scanner, flame ...