Landfill Gas Equipment & Supplies In Liberia
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The GV2 by Continental Controls Corporation is an electronic fuel control valve designed specifically for small to midsized gas engines. It offers advanced electronic fuel control to allow fuel flow ranges that include LHV/Low BTU flare gas, biogas, and landfill gas. The GV2 features a servo-coil actuator, making it fast and ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
For special requirements i.e., landfill gas application, the customer can implement our innovative and low emission NOXtor ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
It can be used with alternative fuels like biogas and landfill gas, making it a cost-effective and environmentally friendly solution. It differs from the AGV10 in size, as it is ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
CCC's Electronic Gas Carburetor (EGC) precisely controls the air/fuel ratio using variable pressure control combined with an advanced and improved mixing venturi. CCC offers an innovative and state-of-the-art approach to Gaseous Fuel Carburetion for most gas engines in the range of 10 to 500 horsepower. ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions. Specially designed for the biogas market, AERZEN biogas blowers of series GM ensure ultimate reliability and ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
The Biogas compressor series C is an oilfree screw compressor in 3 sizes for volume flows up to 1900 m³/h and 3,5 bar overpressure. It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants ...
-
Manufactured by A.H. Lundberg Systems Limited (AHLS)based in CANADA
A. H. Lundberg is the leading supplier of non-condensable gas (NCG) collection systems in the Pulp and Paper industry. We have over 60 years of experience with implementing waste gas collection systems, thermal oxidizers, and gas injection into boilers, kilns and incinerators to handle all types of NCG sources. ...
-
Manufactured by Biogas Systems ABbased in SWEDEN
The gas boiler takes the collected landfill gas and converts it into heat. We supply gas boilers of various outputs as complete, prefabricated ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
It is suitable for boosting the intake pressure of treatment plants for biogas (BGTP) or as an essential part of biogas injection plants (BGIP) for the compression of biomethane to inject into gas grids. The biogas compressor offers variable drive types with belt or direct drive and is extremely robust, durable and energy efficient. ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and high degree of ...
-
Manufactured by Albers Alligatorbased in NETHERLANDS
The Albers Alligator Biogas holder stores biogas safely at pressures up to 50 mbar. The holder is maintenance-friendly and meets the most stringent requirements. Extracted biogas and landfill gas must be stored temporarily in biogas and landfill gas plants and put under a certain pressure for transport. Albers Alligator has ...
-
Manufactured by Wagna Power System GmbHbased in GERMANY
Wagna G series ,gas generator set , is equipped with Wagna gas engine ,which is developed and designed by ourselves. It covers the range of 20-500 Kw,and is fueled by natural gas, biogas, sewage biogas, landfill gas and other mixed ...
-
based in USA
Technologies to Upgrade Your Landfill Biogas and Meet Pipeline Specifications. EcoVapor’s catalytic deoxo (oxygen removal for biogas upgrading) and H2S treating solutions remove contaminants from your Landfill gas stream, specifically by eliminating oxygen and H2S using sustainable technologies without generating harmful byproducts. ...
-
Manufactured by LSC Environmental Products, LLCbased in USA
LSC’s Solar Spark Vent Flares provide reliable destruction of landfill gas and its attending odor. Specified by top engineering firms as a stand-alone solution, or as a supplement to more sophisticated gas extraction systems, Solar-Spark's portability, independent power, and failsafe technology allow operators to confidently place the ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
It is particularly well suited to troublesome gases such as landfill ...
-
Manufactured by Hofstetter Gastechnik AGbased in SWITZERLAND
Landfill gas is a source of energy which can be used for electricity and heat production. Electricity and heat can be produced in quantities sucient for self-utilization, becoming self-sustainable and not using any external resources. They can also be used to produce bigger quantities, which can afterwards be sold to the grid or to local ...
-
Manufactured by Xebec Adsorption Inc.based in CANADA
When processing biogas into a low-cost source of renewable energy, the M-3200 handles the job with ease. Featuring ruggedness and reliability, these compact, easily installed systems purify gas streams containing methane to generate higher value products than previously possible. For biogas streams such as landfill gas and digester ...
-
Manufactured by Gastechnik Himmel GmbHbased in AUSTRIA
The series MTU is a start-up and emergency flare (according to TA-Luft) with concealed burning. Area of deployments; Thermal disposal of combustible surplus gases such as in biogas, sewage and landfill gas plants. Various special gases. ...
-
Manufactured by Tedom a.s.based in CZECH REPUBLIC
The gas treatment system is primarily designed to reduce the biogas, landfill gas or mine gas humidity to the level suitable for the use in a CHP unit. The entire system is put on a base frame. The particular parts of the set come into contact with the gas and all the gas and liquid pipelines are ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you