Landfill Gas Equipment & Supplies In Sierra Leone
-
Manufactured by ERT Refrigeration Technology GmbHbased in GERMANY
The StirLNG-1 is a single-cylinder cryogenerator based on the Stirling principle with a cooling capacity from 1.5 kW and a condensing capacity from 0.1 million litres of LNG per year. It can be used as a stand-alone system with its own control unit or in multisystem systems for ...
-
based in UNITED KINGDOM
We can supply bare boosters or fully functioning packages complete with control systems, acoustic hoods and connecting pipework. These machines are fully supported with spare parts and we also offer repair and reconditioning services. ...
-
Manufactured by Guascor Energy S.A.U.based in SPAIN
Lean burn and electronically carbureted the SM series of gas engines provide an excellent solution for power generation, cogeneration and trigeneration ...
-
Manufactured by Motortech GmbHbased in GERMANY
Based on the MIC4 series, MOTORTECH produces a special controller version as a replacement for the TEM-ZS1 and TEM-ZS3 ignition system used on MWM/DEUTZ gas engines. Designed as an exchange device, the MIC4-ZS enables a quick conversion without great effort. With its future oriented electronical concept, the MIC4-ZS convinces with improved engine starting performance, smooth ...
-
Manufactured by Gastechnik Himmel GmbHbased in AUSTRIA
The series HTF is designed as a works flare (according to TA-Luft) with automatic exhaust temperature control at 1000°C and a dwell of at least 0.3 seconds. ...
-
Manufactured by Pyro Green-Gas (formerly known as AirScience Technologies Inc.)based in CANADA
AirScience experience with oxidation with precious metal catalyst goes back to the early years of the company with the supply of large catalytic reactors for the oxidation of hydrogen bromide (HBr) in the purified terephtalatic acid (PTA) industry. Such as the PTA plants in Montreal, Canada and Altamira, Mexico have used AirScience CaTox units for many ...
-
Manufactured by Utile Engineering Co. Ltd.based in UNITED KINGDOM
This range of quiet running Turbo gas boosters are available in 1, 2, 3, 4 and 5 stage forms and have been developed to run continuously under full load conditions delivering a wide variety of gases at reasonably high pressures. The shaft is sealed to isolate the bearings when boosting landfill or biogas. ...
-
Manufactured by Gas Compressors Ltd (GCL)based in UNITED KINGDOM
As the rotor is offset, the segments that are created by the vanes vary in size through the cycle, causing the trapped gas to be compressed. Ports in the housing wall are positioned to let the gas in and out at the points of minimum and maximum pressure. Fully oil flooded versions are also available, with no oil loss to process. ...
-
Manufactured by Stirling Cryogenics B.V.based in NETHERLANDS
There are several different designs for different feed gas compositions. Standard designs are available for: Biogas, Biomethane, Pipeline Natural ...
-
Manufactured by Organics Group plcbased in UNITED KINGDOM
The MC range of flare stacks provides a combustion strategy which holds the gases at 1200oC for the specified retention time. This takes to its realistic limit this form of combustion control. The key to this form of technological solution is to raise the temperature of the combustion process to 1200oC and retain the combustion gases at this temperature for an extended period of ...
-
Manufactured by EcoChem Analyticsbased in USA
The CarbonOxy is a unique device for measuring CO2 and O2 on a Euro Printed Circuit Board (PCB). Carbon Dioxide is measured using the dual wavelength technique (NDIR - Non-Dispersive Infra Red) while Oxygen is measured using Zirconium Oxide. This combination ensures a quick response time along with elimination of interference from other gases. With various DIP switches on the circuit board, the ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine ...
-
Manufactured by Tectiko Innovations & Equipment Pvt. Ltdbased in INDIA
Gas-tight fans. Welded steel body or stainless steel. Aluminum impeller. ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by INNIO Jenbacher GmbH & Co OGbased in AUSTRIA
Introduced in 1976, INNIO's Jenbacher Type 2 gas engine offers high efficiency power with a robust design. The stationary engine concept provides excellent durability, while enhanced components and a proven control and monitoring model give the Type 2 engine outstanding reliability. ~1,250 engines delivered since 1976. ...
-
Manufactured by Lone Star Blower, Inc.based in USA
Lone Star specializes in engineering, manufacturing and testing of standard and custom blower systems for any pressure, vacuum, air or gas ...
-
Manufactured by Capstone Green Energybased in USA
Can be paralleled up to 30MW of ...
-
Manufactured by Capstone Green Energybased in USA
Expandable Can be paralleled up to 30MW of power. Your location could not be detected. Please allow www.capstoneturbine.com to detect your location to find the distributor that services your region. If you previously blocked CapstoneTurbine from knowing your location, click the location marker symbol in your address bar to fix ...
-
Manufactured by Chekvan Technology Co.,Ltd.based in CHINA
OLGA1000 online biogas monitoring system adopting advanced laser sensing technology can realize the online monitoring of methane gas, fast, accurate and stable. ...
-
Manufactured by INNIO Jenbacher GmbH & Co OGbased in AUSTRIA
The J412 is a part of the efficient Type 4 engines family, a V12-cylinder power generation solution. A high-efficient combined heat and power solution used in medium-size businesses across multiple ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you