Medium Wind Equipment Supplied In Europe

The V172-7.2 MW™ is designed for low to medium wind conditions and offers expanded site applicability through flexible ...

The V162-6.2 MW™ is designed for low to medium wind sites and has extensive application in high wind ...

The NPS 100C-24, with 95kW rated power and a rotor of 24.4 meter, provides a high energy yield. It offers long-term benefits at low operational costs during its entire life ...

Medium Power Wind Turbine, Synchronous / Permanent Magnet, Pitch Control, Full Power ...

Medium Power Wind Turbine, Synchronous / Permanent Magnet, Pitch Control, Full Power Converter, Directly Connected to Distribution ...

Medium-range wind turbines for industrial self-use energy generation. Produce your own energy with our next-generation nED100 medium power wind turbine for industrial and commercial self-use energy generation and sustainable ...

With its 83 m rotor diameter and design for TC2A wind conditions, aeroMaster 1.5/83 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

With its 103 m rotor diameter and design for TC2A wind conditions, aeroMaster 2.5/103 meets the highest demands concerning energy yield and operational safety and is designed for operation at medium wind speeds. Because hot climate and cold climate conditions were taken into account in its design, the aeroMaster is ideally suited for reliable ...

The V100-2.0 MW® IEC IIB turbine allows you to increase productivity by opening up low- and medium-wind sites which were previously regarded as ...

The V120-2.2 MW optimises park level production under stable low to medium wind ...

Suzlon began manufacturing their S6X series wind turbines in 2002 and eventually phased out production in 2016. A cumulative capacity of 3673.75 MW is installed worldwide counting S64 and similar turbines like the S62 and S70. S64 turbines are built to deliver an optimum output in locations with low to medium wind speed regimes. ...

The SG 2.1-114 is the benchmark for medium and low wind sites thanks to its low power density, which allows maximum profitability. A strong market presence bears testament to this, with over 4,300 MW installed ...

The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar reliability and suitability for all kinds of sites and wind conditions, from the most challenging locations to low and medium wind speed sites. Thanks to this performance, the platform's installed capacity stands at over 17,400 MW worldwide, while average fleet ...

Maximize your annual energy output when (re)powering medium wind distributed energy sites; The DIRECTWIND 58 is the result of EWT commitment to continuous innovation and improvement. This 58-metre pitch-controlled, variable speed wind turbine is designed to deliver higher annual energy outputs in medium wind ...

The key characteristics of the Gamesa 2.0-2.5 MW platform are its robustness, stellar reliability and suitability for all kinds of sites and wind conditions, from the most challenging locations to low and medium wind speed sites. Thanks to this performance, the platform's installed capacity stands at over 18,600 MW worldwide, while average fleet ...

GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output ...

The high-yield BW 4500 wind turbine is particularly suitable for medium and low-wind locations. With a rotor diameter of 151 m and hub heights of up to 140 m, the 4.5 megawatt turbine delivers very high yields even in low wind conditions. Various tower designs and a low-maintenance construction reduce the operating and ...

The N117/3000 is designed for medium wind speeds (IEC-2) and has a 20 percent greater nominal output compared with its predecessor. Yet, despite this substantial increase in output, sound power levels have remained ...

The V150-6.0 MW offers a large operational envelope, optimising production in medium to high wind ...

With a rated power of 500 kilowatts (kW) and a rotor diameter of 45 meters, it is a turbine that can make your project on a medium to low wind site a financial success. The 45-500 is designed to the same international standard as our flagship turbine. The 45-500 has Windflow's characteristic lightweight but robust design, and is suitable for a variety of ...