Power Factor Equipment Supplied In Latin America

The AIT02ZPFC series three-quarter-brick power factor correction module accepts a wide 85 to 264 VAC input and presents a unity power factor. It accommodates AC supply frequencies of 50 Hz, 60 Hz or 360 to 800 Hz. Rated at 720 W, the module offers a conversion efficiency of up to 93% and provides a typical output voltage of 393 ...

The 2.4 kW AIF06ZPFC series power factor correction module presents a unity power factor from an 85 to 264 VAC input and delivers a high 97.3% conversion efficiency and nominal non-isolated output of 400 ...

HT9023 has been designed to measure AC, DC AC+DC current up to 1000A in TRMS reaching CAT IV 600V and CAT III 1000V in compliance with safety standard IEC/EN61010-1. The clamp also measures DC voltage up to 1500V, AC, AC+DC voltage up to 1000V, Active, Reactive and Apparent Power, Power Factor, Energy, voltage/current harmonic analysis up to the ...

Advanced Energy's Artesyn CSU1300ADC is housed in the standard 1U x 73.5 x 185 mm form factor featuring -48 VDC input voltage. This DC-DC power supply belongs to the CRPS family of products, and matches the mechanical form and fit of Advanced Energy's AC-DC power supplies. The common form, fit, and function for all products in the family provides ...

The CSV series bulk front end power AC-DC supply is designed for systems where scalability and density are requirements. With multiple power levels to choose from, this family provides designers with the ability to change the power supply to optimize according to system power ...

Advanced Energy's Artesyn CSU2000ADC is housed in the industry standard 1U x 73.5 x 185 mm form factor featuring -48 VDC input voltage. This DC-DC power supply belongs to the CRPS family of products, and matches the mechanical form and fit of Advanced Energy's AC-DC power supplies. The common form, fit, and function for all products in the family ...

The LCC1200 series comprises AC-DC power supplies offering main output voltages of 24, 28, or 48 VDC and standby output of 5 VDC 1.5 A (maximum). The power supplies accept a universal 90 to 264 VAC input and offer maximum output at 1,200 W 180 to 264 VAC and 800 W 90 to 132 VAC. ...

Compact at 4.15 x 2.78 x 11 inches, it has a power density of 24 W per cubic inch. Six units on a 19-inch rack shelf provide a total of 18 kW. The DTS3000TE series power supplies are ideal for server, networking, telecom, and redundant power applications. With a main 12 V output delivering up to 250 A and staying regulated down to zero load, ...

Designed for a wide range of industrial, lighting/horticulture, and semiconductor applications, Advanced Energy’s iHP Liquid Cooled configurable precision power system provides accuracy, resolution and stability as either a programmable voltage or current source. It provides up to 20 kW in 3 kW increments and can be configured for up to 8 outputs using a wide variety of ...

The power supply has medical safety and industrial safety (SEMI F47) approvals. The iHP offers either an analog or a digital interface supporting standard protocols, while a GUI eases configuration and user-dashboard creation. For horticulture, a detailed scheduling and control software is available. ...

EverExceed RMI series is a new inverter with advanced technology and improved modularity with high efficiency (≥90%). The series has a vast range of 500VA-10,000VA. This inverter has been designed to offer low cost per VA and offers our standard features, high level of intelligence, reliability and smart ...

The LoRa® Power Meter with CTs, the ITE 11LI, is one more member of the family of IoT endpoints from Khomp that operates according to the LoRaWAN™ protocol. Its function is to measure the consumption and the quality of energy using current transfor0mers ...

Advanced Energy's Paramount HFi is a 13.56 MHz RF power delivery system with an integrated solid-state matching network capable of operating across a wide variety of impedance zones. The solution offers consistent power delivery, high power density, and exceptional ...

The SLC-3100 is an intelligent wireless lighting controller with exceptional fault tolerance and a multitude of features. The SLC-3100 provides intelligent ON/OFF switching, dimming control, optional GPS, highly accurate power metering, analog and digital sensor inputs, and constant status and health monitoring of your lighting ...

SICAM MMU (Measurement and Monitoring Unit) is a power monitoring device that allows the measuring of electrical quantities in electrical networks in a single unit. ...

Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...

Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...

SICAM P is a power meter for panel mounting with graphic display and background illumination, or for standard rail mounting, used for acquiring and/or displaying measured values in electrical power supply systems. ...

Dewesoft power analyzer features a high-sampling rate, high-bandwidth, and high-accuracy hardware for power analysis on electric motors, inverters, transformers, switches and any other electronic equipment. The ability to connect other sensors for temperature, vibration, RPM, torque offers a unique solution for modern power analysis ...