Power Monitoring System Equipment & Supplies

The Abriox OSPREY SP Multichannel Remote Pressure Monitor is a solar-powered remote monitoring unit that can be installed in pressure regulating stations, district governors and city gates to monitor gas pressure up to 1450psi. A total of 3 pressure channels are available [OSPREY-MCA add-on required] which enables multiple ...

The Power System Monitoring PFM300 is a multifunctional Dynamic System Monitor which fully integrates with DIgSILENT PowerFactory software. PFM300 features grid and plant monitoring, fault recording, power quality and grid characteristics analysis. ...

The TorqueTrak Torque and Power Monitoring System (TPM2 series) is a rugged precision instrument designed to measure torque and/or power on rotating shafts in real time using precise strain-gage sensors. The TPM2 is custom designed to fit on shafting as low as .75″ (19mm) and up to 48″ (1220 mm) in diameter. ...

The system uses two precise optical fork sensors for twist angle measurement. Besides on-line torque measurement, ST&P system enables measurement of power and rotating ...

Cloud/IoT - 3 Phase Power Monitoring Solution. Visualize your Power Consumption and Quality. Connect the IPAC 3P C , Register on our website and start logging data, its that ...

IoT 3 Phase Power Monitoring Solution for SCADA and Motor Control Applications. Key elements of any SCADA system. Simple network commands with driver ...

GeoSIG's SMS/SAS systems are mostly used in Nuclear Power Plant or other Industrial Facility Seismic Monitoring Projects. If you need any further specific information, please do not hesitate to contact us through our agent assigned for this kind of instrumentation for your geographical region or ...

Whether from the perspective of the power cable's own safe operation or from the perspective of power system dispatching requirements, the load capacity of the power cable is required to be monitored in real time.When the cable runs under the rated load, the core temperature reaches the allowable value.Once the ...

In power generation SO3 measurements provide data to allow the operator to burn fuel in the most efficient way to minimize corrosion of the plant and limit acid discharges to the environment. Monitoring of SO3 is also important where it is formed as a by-product, e.g. in De-NOx systems.In processes where H2SO4 is used or ore with large amounts of sulphur is ...

Monitor the operation status by the low-power CPU, and transfer the status of the module to the monitoring host in both normal and fault modes. Ability to upload current status values of monitored devices in real time. Wire system: It is connected to the monitoring host by a non-polarity signal ...

Monitor the operation status by the low-power CPU, and transfer the status of the module to the monitoring host in both normal and fault modes. Ability to upload current status values of monitored devices in real time. Wire system: It is connected to the monitoring host by a non-polarity signal ...

The DIRIS Digiware BCM is a multi-circuit current measurement module with 18 or 21 integrated sensors and allows the monitoring of all types of power distribution units (PDUs). These modules are also equipped with three RJ12 channels allowing them to be connected to TE/TR/iTR/TF current sensors using RJ12 cables and various ΔIC differential ...

This measurement solution supports campaigns (repeated measurements at the same location) by a configuration manager with up to 20 storable device settings, can provide a WLAN access point for connecting mobile devices and provide all data for evaluation via the device's own website. In order to be able to validate the power quality at the measuring location, the duration of the ...

The MAVOSYS 10 opens up entirely new possibilities for monitoring mains quality, power and energy: It's the first mains analyzer with more than 8 channels, it can be configured in a modular fashion and it provides an ideal, cost-saving solution for all requirements. In combination with an optional ¼ VGA touch-screen, the multiuser web interface from Encore ...

The LINAX PQ3000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. It stands out by the display quality and intuitive ...

The LINAX PQ5000 combines the characteristics of a power quality measurement device with functions for comprehensive energy consumption and condition monitoring. The integrated webserver allows remote access to all measured data and the parameterization of the device. The device provides a wide functionality, which can be extended further by means of optional ...

The U1602 micro-summator is used as a PC adapter or a LON interface for the ECS-LAN, and is not equipped with its own display or control elements. All relevant energy and power consumption data are acquired by 64 processing channels over defined periods of time at a programmable interval, and are stored to memory as load profiles along with corresponding maximum ...

The U1603 mini-summator is used as a PC adapter or a LON interface for the ECS LAN, and is not equipped with its own display or control elements. Inputs and outputs expand the mini-summator to include data logging and optimization ...

The U1601 summator expands the Energy Control System to include processing of analog values, and it simplifies the connection of energy meters to the LON bus. This allows for the logging, visualization and optimization of all electrical and non-electrical energies and energy consumption, as well as cost center ...

The calibrated energy meter can be used to acquire and bill active energy in industrial, household, commercial and building management applications. Relevant values are transmitted to data logging, billing and optimizing systems, as well as to building automation and control technology applications, by means of a pulse output, or via LON, M-Bus or L-Bus ...