Power Turbine Equipment Supplied In Colorado

In other words, they are often used in a lower specific speed range. For power generation systems, it is advantageous to operate at 3,600 rpm in order to drive a synchronous generator. In aerospace or other high-power-density systems, the driving fluid is typically very energetic resulting in a high enthalpy drop across the turbine. ...

For areas with the challenge of unpredictable power and during intermittent grid or extended outages, Flex Energy Solutions makes it simple for commercial and industrial facilities to maintain control of their own power ...

Sturdy enough for extreme conditions—including cold weather, high elevation, hazardous climates, and offshore environments, the modular, transportable Flex Turbine® fits any island or remote power site need. Designed for remote monitoring operation, including automatic communications for alarms and trips means no on-site turbine ...

Cogeneration, also known as combined heat and power (CHP), is the simultaneous production of electricity and heat from natural gas. Flex Turbines® recover the heat normally lost in traditional grid electricity generation and use it for heating, cooling, dehumidification and other ...

In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or “steam ...

A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final stage of water ...

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. ...