Power Turbine Equipment & Supplies Near Saudi Arabia

The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission ...

The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. ...

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...

The Nacelle Cover is mounted on the bed plate of the turbine, it protects generator, gearbox and control system components. This makes the Nacelle Cover crucial part the protect wind ...

By this way, ARATrap is an innovative ARANER’s technology that ensures no entry of unfiltered air into the gas turbine filter house. ARANER has wide experience in implementing successful projects of Turbine Inlet Air Cooling (TIAC), a method for power augmentation in gas turbines. Depending on the ambient conditions and ...

This technology ensures that this cooled air will not drag any water drop by installing ARADrops downstream the air cooling heat exchanger, increasing the turbine power output. ARADrop is specially designed so as to let the inlet air continue to the gas turbine compressor but not the possible water drops produced in the air cooling process, since ...

ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-I", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened ...

ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-I", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened ...

In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or “steam ...

A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final stage of water ...

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. These systems ...

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. These systems ...

The CX300 generator set is the class leader in turbine power and efficiency in the 7-9 MW range of gas turbines. Featuring our most efficient Siemens Energy gas turbine, the CX300 is highly flexible, making it an excellent choice for an array of power generation applications. ...

The SGT-100 gas turbine is an industrial gas turbine in the power output range from 5 to 6 megawatts (MW) which combines compact and rugged construction with advanced technology. For industrial power generation a single-shaft version of the SGT-100 is used which has a power output of 5.05 MW(e) or 5.1 MW(e). ...

The Centrax CX400 generator set is our most powerful package. It tops its class for turbine power and electrical efficiency in the 10-15 MW gas turbine range. Featuring flexibility and excellent emissions performance, the CX400 is the ideal solution for a variety of energy-demanding applications. ...

Cost, durability and flexibility are major challenges in the power generation industry. The quality of manufacturing, long life service, ability to fire with various types of fuels and capability of use in simple and combined cycles are among the characteristics that the MAPNA power gas turbine can offer to tackle those challenges. ...

Knowing the time, money and effort that must be consumed for maintenance and overhauls, most customers are eager to buy machines that are robust enough to with stand difficult working conditions and still be available to keep on making electrical power. The MAPNA steam turbine has been designed to meet the requirements with fewer overhauls and more availability. ...