Power Turbine Equipment & Supplies Near Mississippi

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. ...

The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...

ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-I", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened ...

ATI 409HP (UNS S40900) ferritic stainless steel was introduced by ATI in 1961 to provide improved oxidation and corrosion resistance for automotive exhaust systems in comparison to carbon steel. The alloy was designated "MF-I", indicating its end use: automotive mufflers. The good fabricability of this alloy, combined with its basic corrosion resistance and economy have significantly broadened ...

American Wind, Inc’s Advanced WindWall® is the worlds first complete wind turbine system that combines state of the art technologies to pack an incredible amount of power into a relatively small package. ...

With a design based on 30 years of actual field experience, the Pall HLP6 oil purifier combines the excellent efficiency of mass transfer purifiers with an exceptional level of reliability and ease of ...

Watertube boilers are used for various high capacity industrial process applications that demand high pressures and temperatures, large capacity dry, high-quality steam, and the potential for superheated steam (steam that is heated above the boiling point at a given pressure) used for steam turbine power generation.These highly efficient boilers provide a faster ...

In addition to delivering its own turbines, main condenser and its pumps, PBS also provides a complete condensate management system. If requested by the customer, it also provides the exhaustion of steam from the ...

Modern single and two-stage steam turbines used in power units for power generation and mechanical drives (compressors, pumps, ...

ETG I and ETG II expansion turbines are used for energy efficient reduction of gas pressure in the control and transmission stations of gas pipelines and in chemical ...

PBS turbines can be used to propel various types of machinery in many ...

Simple single-shaft single-stage turbines designed for powering pumps, turbochargers, fans, mills and grinders, or they can also be used to power an electric ...

The ASE40 Industrial Gas Turbine by Vericor Power Systems serves as a versatile solution for power generation and mechanical drive applications. It is particularly noted for its reliable performance in continuous duty applications, providing 3.0MW of power which is crucial for driving gas compressors. ...

The TF series marine gas turbines by Vericor Power Systems are a result of decades of engineering experience and technical innovation, rooted in the legacy of the Lycoming Engine Company. These turbines are designed for cantilever mounting off the reduction gear, optimizing both weight and efficiency. ...

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. These systems ...

Integrated Flow Solutions Fuel Gas Conditioning Systems are designed to protect natural gas fueled engines and turbines from liquid slugs, solids (< 0.1 microns) and liquid aerosols. Additionally, the fuel gas is superheated above the hydrocarbon and water dew points to prevent liquid condensation in the turbine’s combustion chambers. These systems ...

The Coanda Power House includes small turbines, generators, and controls designed for ease of installation, control, and ...