Power Turbine Equipment & Supplies Near Wyoming

For diesel and natural gas engines from 400 kW to 10MW employed in mission critical installations. Achieve EPA Tier IV Compliance and beyond. Achieve IMO Tier III Compliance and beyond. Excellent solution for NEW and RETROFIT engine ...

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. ...

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...

The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in relation to the drive (output) ...

Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning ...

In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or “steam ...

A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final stage of water ...

In other words, they are often used in a lower specific speed range. For power generation systems, it is advantageous to operate at 3,600 rpm in order to drive a synchronous generator. In aerospace or other high-power-density systems, the driving fluid is typically very energetic resulting in a high enthalpy drop across the turbine. ...

Vertical axis wind turbine rated 300 watts for any location-mounts on 3″ or 4″ sched-40 steel pipe at 10′ height minimum and rated for 300 watts output. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm. ...

Vertical Axis Wind Turbine (VAWT) unit with 1000 watts rated output and for mounting on 5″ sched-40 steel pipe-similar to C-500 unit. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm. ...

Vertical Axis Wind Turbine (VAWT) with controller for mounting on 4″ sched-40 steel pipe at approx 7-10′ level about ground. The C-type wind generator employs planetary gear technology where every turn of the wind blades equals 3 turns of the generator rotor to produce high power at low rpm. ...

For areas with the challenge of unpredictable power and during intermittent grid or extended outages, Flex Energy Solutions makes it simple for commercial and industrial facilities to maintain control of their own power ...

Sturdy enough for extreme conditions—including cold weather, high elevation, hazardous climates, and offshore environments, the modular, transportable Flex Turbine® fits any island or remote power site need. Designed for remote monitoring operation, including automatic communications for alarms and trips means no on-site turbine ...

Cogeneration, also known as combined heat and power (CHP), is the simultaneous production of electricity and heat from natural gas. Flex Turbines® recover the heat normally lost in traditional grid electricity generation and use it for heating, cooling, dehumidification and other ...

The Titan™ 250 is our most powerful gas turbine package and is based on proven technologies from other Solar Turbines models. It produces 50 percent more power in the same footprint as the Titan 130, while providing 40 percent shaft efficiency with emissions reduced by up to 30 ...

Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...

Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...

90MW Medium-Size Gas Turbine for Flexibly Meeting Load Balancing Requirements. Doosan Enerbility offers a product lineup ranging from small to large-sized gas turbines. We are also working on the development of hydrogen gas turbine technology, with the aim being to deliver both hydrogen dual-fuel and 100% hydrogen-fueled ...

The HGT400 gas turbine auxiliary power unit (APU) is the next generation derived from the RE220 family of APUs. The HGT400 APU offers an integrated system that supplies pneumatic and electric power for the aircraft while on the ground or ...

GT inlet heating or anti-icing systems using recovered heat from the turbine exhaust, providing even distribution of the heated air over the face of the inlet filter to prevent filter and ducting from icing with extremely low inlet and exhaust pressure drops as well as high turbine performance. Results show that our Anti-icing systems have a larger ...