Solar Cell Equipment & Supplies
-
Manufactured by Resol GmbHbased in GERMANY
The solar cell is used for measuring the irradiation intensity. The short-circuit current rises with increasing irradiation intensity. Depending on the controller, the sensor can also be used for additional plausibility control or direct control. ...
-
Manufactured by Win Win Precision Technology Co., Ltd.based in TAIWAN
Greater solar cells with greater module efficiency on your roof. Nominal Power: 410 Wp. Efficiency: Up to 20.93%. Maximum System Voltage: 1500 V. Snow/Wind Load: 5400/2400 Pa. Dimensions: 1726 mm × 1135 mm × 35 mm. Weight: 21.5 ...
-
based in NETHERLANDS
A solar cell converts light energy into electrical energy, which can then be consumed normally. The process occurring in a solar cell is called photovoltaic conversion. This is how sunlight is converted into ...
-
Manufactured by DAS Solar Co., Ltd.based in CHINA
DAS Solar's P-Type Solar Cells are a flagship product in the photovoltaic industry, characterized by impressive technical specifications and high efficiency. These cells boast a front efficiency of over 23.5% and a bifaciality of 75%, making them highly effective in converting sunlight into electrical energy from both sides of ...
-
Manufactured by Solaronix SAbased in SWITZERLAND
Solaronix is developing a new generation of photovoltaic panels based on Dye Solar Cell technology. Our models offer unprecedented possibilities in terms of customization and ...
-
Manufactured by Motech Industries, Incbased in TAIWAN
Dimension : 156.75mm x 156.75mm ± 0.25mm. Thickness(Si) : 180μm ± 20μm, 200μm ± 20μm. Front : Blue silicon nitride anti-reflection coatings, 0.7±0.1 mm silver busbars. Back : Full-surface aluminum back-surface field, 1.7mm±0.1mm (silver / aluminum) discontinuous soldering ...
-
Manufactured by Motech Industries, Incbased in TAIWAN
High conversion efficiencies resulting in superior power output performance. Outstanding power output even in low light or high temperature conditions. Optimized design for ease of soldering and lamination. Long-term stability, reliability and performance. Low breakage rate. Uniform ...
-
Manufactured by Schmid Groupbased in GERMANY
Based on n-type material PERL cells have a long life expectancy and achieve an efficiency potential of 25 %. Combined with the per se bifaciality of this cell architecture up to 40 % higher energy harvest in PV installations can be achieved. The simple manufacturing process based on the SCHMID co-diffusion leads to best of class conversion ...
-
Manufactured by CETC Solar Energy Holdings Co., Ltd.based in CHINA
CETC Solar Energy's multi-junction solar cells have contributed to thousands of satellites for over 10 countries in 30 years. CETC Solar Energy's latest generation solar cells and Coverglass Interconnected Cell (CIC) assemblies are the highest efficiency commercially available ...
-
Manufactured by DPE Solarbased in TURKEY
Solar cells ( also called photovoltaics) absorb sunlight and convert it directly to electricity. Solar cells are very thin ( about 1/ 100th of an inch thick). Most Online you’ll have the ability to put in them after completion. When you purchase your pay for college papers Out of us. ...
-
Manufactured by InnoLas Systems GmbHbased in GERMANY
The losses in Voc and FF caused by dots, which are not contacted properly, are avoided due to the size of the dashes. An optimized dash pattern can achieve highest cell efficiencies. ...
-
Manufactured by DAS Solar Co., Ltd.based in CHINA
Product Features: Dimension: 182mm×182mm±0.25mm,Φ247±0.25mm. Cell Thickness: 140μm±14μm. Front Side: 0.03±0.015mm wide bus bars,132fifingers,SiOxNy. Back Side: 0.03±0.015mm wide bus ...
-
Manufactured by United Renewable Energy Co., Ltd. (URECO)based in TAIWAN
United Renewable Energy Co., Ltd. (a company from Taiwan where the sun shines) solar cells feature high quality, outstanding performance and reliability that you can count on. We have gained reputation among global ...
-
Manufactured by Sunplugged GmbHbased in AUSTRIA
In order to achieve an unprecedented freedom of design, Sunplugged develops its own proprietary thin-film solar cell since 2010. Our photovoltaic modules are lightweight, flexible and easy to integrate. Even low quantities can be produced economically and the design is optimized according to the requirements of our ...
-
Manufactured by Sol Chip Ltd.based in ISRAEL
Sol Chip Pak™ offers 24/7/365 non-stop function by using Solar cells, a Rechargeable Battery and advanced Power Management circuitry. This unique design will continue to provide power for 24 hours a day during summer and winter for over 10 years. This power module includes all the components that are required to harvest energy from light, charge ...
-
Manufactured by ReRa Solutions B.V.based in NETHERLANDS
The ReRa Solar Cell Probe (RR-3053) is engineered for precision in standard solar cell measurements. Enhanced from its predecessor, the RR-3056, the RR-3053 offers a sturdier build and cost efficiency. This probe integrates seamlessly with a 4mm banana connector and features a magnetic base for versatile mounting options, ...
-
Manufactured by Apollo Solar Energy Co., Ltd - Gintungbased in TAIWAN
Features: 315W-335W. 1675x992x40mm. ...
-
Manufactured by Apollo Solar Energy Co., Ltd - Gintungbased in TAIWAN
Features: 365W-385W. 1956x989x45mm. ...
-
Manufactured by Apollo Solar Energy Co., Ltd - Gintungbased in TAIWAN
Feature: 300W-320W. 1640x992x40mm. ...
-
Manufactured by Zhongli Talesun Solar Co., Ltd.based in CHINA
ALESUN guarantees that defects will not appear in materials and workmanship defined by IEC61215, IEC61730 and UL1703 under normal installation, use and maintenance as specified in Talesun’s installation manual for 10 years from the warranty starting date.TALESUN guarantees that defects will not appear in materials and workmanship defined by IEC61215, IEC61730 and UL1703 under normal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you